HardLabs

LinuxBoard

joeperri95·LinuxBoard

LinuxBoard PCB layout, top view — open source STM32 board by joeperri95
Simulate this board

About the LinuxBoard PCB

LinuxBoard is an open source STM32 PCB design by joeperri95, published on GitHub. It is a 4-layer board measuring 249.1 × 142.2 mm, with 165 components from 48 distinct parts.

Its main chip is the STM32MP151AAB3, from the STM32 family. Other key parts include the MT41K64M16TW-107_AAT_J_TR, DP83848C and STPMIC1APQR. By type, the board carries 94 capacitors, 35 resistors, 9 inductors, 7 connectors, 6 diodes and 5 switches.

From the project

stm32mp151 hardware platform

A basic stm32mp151 board to help me get more familiar with - application processors - high speed digital design - working with BGAs

Main components on the LinuxBoard

STM32MP151AAB3MT41K64M16TW-107_AAT_J_TRDP83848CSTPMIC1APQR

LinuxBoard bill of materials (BOM)

165 components, 48 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32MP151AAB3
U1
1
MT41K64M16TW-107_AAT_J_TR
U2
1
DP83848C
U3
1
STPMIC1APQR
U4
1
24MHz
Y1
1
32.768KHz
Y2
1
25MHz
Y3
1
Wuerth_7499010121A
J1
1
Conn_02x10_Counter_Clockwise
J2
1
Micro_SD_Card
J3
1
USB_A
J4
1
Conn_ARM_JTAG_SWD_10
J5
1
USB_B_Micro
J6
1
Barrel_Jack_Switch
J7
2
3A
F1, F2
1
SW_DIP_x03
SW1
4
SW_Push
SW2, SW3, SW4, SW5
4
LED
D1, D2, D4, D5
2
D_Schottky
D3, D6
3
Ferrite_Bead
FB1, FB2, FB4
Show 28 more
QtyPartRefs
5
1u
L1, L2, L3, L4, L5
1
4.7u
L6
2
12p
C1, C2
2
20p
C3, C4
21
100n
C5, C7, C9, C43, C44, C45, C58, C59 +13
2
33p
C6, C8
6
2.2u
C10, C11, C12, C13, C32, C33
8
4.7u
C14, C68, C69, C71, C73, C74, C76, C84
10
10u
C15, C57, C61, C62, C72, C77, C78, C79 +2
37
1u
C16, C18, C19, C20, C22, C23, C24, C25 +29
2
1n
C17, C21
2
10n
C67, C94
1
220u
C75
1
C
C92
5
470
R1, R2, R7, R14, R15
8
10k
R3, R4, R5, R18, R23, R27, R29, R32
1
220
R6
5
0
R8, R21, R22, R34, R35
1
4.87K
R9
2
49.9
R10, R11
2
2.2K
R12, R13
1
220
R16
1
470
R17
2
240
R19, R20
4
4.7k
R24, R25, R26, R28
1
100
R30
1
3K
R33
1
DNP
R36

LinuxBoard design files

The KiCad project lives in the joeperri95/LinuxBoard repository on GitHub; these links point at the commit this page was built from.

LinuxBoard: common questions

What microcontroller does the LinuxBoard use?

The LinuxBoard is built around the STM32MP151AAB3, from the STM32 family.

How big is the LinuxBoard PCB?

The LinuxBoard measures 249.1 × 142.2 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the LinuxBoard?

165 components, from 48 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the LinuxBoard design files?

From the joeperri95/LinuxBoard repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the LinuxBoard design in my own project?

The repository has no license, so all rights stay with joeperri95. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the LinuxBoard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards