3 open source boards using the STPMIC1APQR
Real designs built with the STPMIC1APQR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
MPU MOD
Decktrix-Lab
50 × 70 mm294 parts8LNo license63STM32
LinuxBoard
joeperri95
249.1 × 142.2 mm165 parts4LNo license3VikramSat Electrical-Power-Sub-System
Rishaan2202
72 × 72.1 mm123 parts2LMIT1
The STPMIC1APQR in open source designs
The gallery holds 3 open source boards using the STPMIC1APQR from 3 GitHub repositories; a typical one measures about 72 × 72.1 mm and carries around 165 components.
67% use four copper layers or more, and 33% carry an open source license.
The most starred is MPU MOD by Decktrix-Lab.
Microcontrollers on boards using the STPMIC1APQR
STPMIC1APQR: common questions
Where can I find a STPMIC1APQR reference design?
Each of the 3 boards on this page is a real design using the STPMIC1APQR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the STPMIC1APQR use?
Most are built on STM32 (2).
How big is a typical board using the STPMIC1APQR?
The median is 72 × 72.1 mm, and 33% are two-layer designs.
What is the most popular open source board using the STPMIC1APQR?
By GitHub stars, MPU MOD by Decktrix-Lab, with 63 stars.
Can I simulate one of these boards using the STPMIC1APQR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.