ChibiESC
joewa·ChibiESC·hardware/Looong-Strip_V1/DrChibi.kicad_pcb
About the ChibiESC PCB
ChibiESC is an open source STM32 PCB design by joewa, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 143.5 × 14 mm, with 187 components from 64 distinct parts.
Its main chip is the STM32F405RGTX, from the STM32 family. Other key parts include the ISO1050. By type, the board carries 11 jumpers, 11 capacitors, 5 resistors, 4 connectors, 2 ICs and 2 crystals.
From the project
Free electric speed controller software using ChibiOS
Main components on the ChibiESC
ChibiESC bill of materials (BOM)
187 components, 64 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F405RGTX STM32F40X_LQFP64 ST | lqfp64_pad_mod | U1 |
| 1 | ISO1050 | PDSO-G8 | U2 |
| 1 | CCMUSBB-32005-201 MINI-USB-SHIELD-32005-201 Cypress Industries | mini_USB_gnd | X1 |
| 1 | ABM3B-8.0-10-1UT 8MHz 10ppm | Crystal_5x3mm | X2 |
| 1 | CONN_02X05 | Pin_Header_Straight_2x05_Pitch1.27mm | P1 |
| 1 | IN+ | 1PAD_3x6mm | P3 |
| 1 | IN- | 1PAD_3.5x6mm | P4 |
| 1 | CONN_01X04 Molex | Connector_Molex_PicoBlade_53261-0471 | P5 |
| 12 | 0.47UF 0.47uF | C_0603_HandSoldering | CDrGate1, CDrGate2, CDrGate3, CDrGate4, CDrGate5, CDrGate6, Cboot1, Cboot2 +4 |
| 6 | 10u,35V | C_1206 | CDrHV1, CDrHV2, CDrHV3, CDrHV4, CDrHV5, CDrHV6 |
| 6 | 4.7u,35V | C_1206 | CDrHV1back1, CDrHV1back2, CDrHV1back3, CDrHV1back4, CDrHV1back5, CDrHV1back6 |
| 6 | 10u,35V | C_1206_HandSoldering | CDrHV2back1, CDrHV2back2, CDrHV2back3, CDrHV2back4, CDrHV2back5, CDrHV2back6 |
| 6 | C | C_1206 | CDrHVX1, CDrHVX2, CDrHVX3, CDrHVX4, CDrHVX5, CDrHVX6 |
| 6 | 0.47u,35V | C_0603 | CDrHVs1, CDrHVs2, CDrHVs3, CDrHVs4, CDrHVs5, CDrHVs6 |
| 6 | C0603C225K8RACTU 2.2uF Kemet | C_0603 | CDrLogic1, CDrLogic2, CDrLogic3, CDrLogic4, CDrLogic5, CDrLogic6 |
| 1 | 10n,35V | C_0603_HandSoldering | CHFAC1 |
| 1 | CONN_01X05 | Pin_Header_Straight_1x05_Pitch1.27mm | CONN2 |
| 5 | 2.2U 2.2u | C_0603 | Ccan1, Cmcu1, Cmcu2, Cmcu3, Cmcu4 |
| 1 | 2.2U 2.2u | C_0603_HandSoldering | Ccan2 |
| 6 | 0.47N 0.47n | C_0402 | Ccfilt1, Ccfilt2, Ccfilt3, Ccfilt4, Ccfilt5, Ccfilt6 |
Show 44 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 18P 18p | C_0402 | Cclk1, Cclk2 |
| 1 | 4.7u,35V | C_0805 | Cpwr1 |
| 1 | 10u,35V | C_2220 | Cpwr2 |
| 6 | 0.47U 0.47u | C_0603 | Csens1, Csens2, Csens3, Csens4, Csens5, Csens6 |
| 1 | BAT754S D_Schottky_x2_Serial_AKC__BAT754S NXP | SOT-23 | Dclamp1 |
| 1 | BAT46WH NXP | SOD-123 | Dusb1 |
| 5 | STM32F4:0R / STM32F7:DNP | C_0402 | JP1, JP2, JP4, JP6, JP9 |
| 6 | STM32F4:DNP / STM32F7:0R | C_0402 | JP3, JP5, JP8, JP10, JP12, JP13 |
| 13 | PAD_SMD | PAD_SMD_1x1 | PBOOT0P1, PBOOT1GND1, PBOOT1P1, PBOOT03V31, PVSens1, PVSens2, PVSens3, PVSens4 +5 |
| 1 | PAD_SMD | PAD_SMD_1.2x2.5 | PHFAC1 |
| 6 | PAD_SMD | 1PAD_4x5mm | PMotor1, PMotor2, PMotor3, PMotor4, PMotor5, PMotor6 |
| 6 | 100R | R_0603 | RDrLogic1, RDrLogic2, RDrLogic3, RDrLogic4, RDrLogic5, RDrLogic6 |
| 1 | 100R | R_0603_HandSoldering | RHFAC1 |
| 6 | R/DNP | R_0603_HandSoldering | RY1, RY2, RY3, RY4, RY5, RY6 |
| 2 | 20K 20k | R_0603_HandSoldering | RYOFFS1, RYSGND1 |
| 1 | 0R/DNP | R_0603_HandSoldering | RYS1 |
| 1 | 165R | R_0402 | Radj1 |
| 1 | NI | R_0603_HandSoldering | Rcan1 |
| 6 | 20K 20k | R_0402 | Rcfilt1, Rcfilt2, Rcfilt3, Rcfilt4, Rcfilt5, Rcfilt6 |
| 6 | 10k,0.1% | C_0603_HandSoldering | Rhsens1, Rhsens2, Rhsens3, Rhsens4, Rhsens5, Rhsens6 |
| 2 | 100R | R_0402 | Rled1, Rled2 |
| 6 | 2k2,0.1% | R_0402 | Rlsens1, Rlsens2, Rlsens3, Rlsens4, Rlsens5, Rlsens6 |
| 1 | 2K2 2k2 | R_0402 | Rthwn1 |
| 1 | 10K 10k | R_0402 | Rusb1 |
| 2 | 22R | R_0402 | Rusb2, Rusb3 |
| 6 | SIC632ACD-T1-GE3 DrMOS_SiC632A Vishay | MLP55-31L | UDrmos1, UDrmos2, UDrmos3, UDrmos4, UDrmos5, UDrmos6 |
| 1 | LTM8020V LTM8020 Linear Technology | Housings_LGA_21_6.25x6.25mm | Ureg1 |
| 1 | LP2992AIM5-3.3/NOPB LP2992AIM5-3.3 Texas Instruments | SOT-23-5 | Ureg2 |
| 6 | ACS711KEXLT-31AB-T ACS711 Allegro | QFN-12-1EX_3x3mm_Pitch0.5mm | Usens1, Usens2, Usens3, Usens4, Usens5, Usens6 |
| 1 | RED | LED_0402 | D1 |
| 1 | GREEN | LED_0402 | D2 |
| 1 | STM32F4:2.2u / STM32F7:4.7u | C_0603 | C1 |
| 1 | STM32F4:2.2u / STM32F7:0R | C_0603 | C2 |
| 2 | 2.2U 2.2u | C_0603 | C3, C4 |
| 2 | 100u | C_0805 | C3vi1, C5vo2 |
| 1 | 1u | C_0603 | C3vi2 |
| 1 | 10n | C_0603 | C3vn1 |
| 1 | 4.7u | C_0805 | C3vo1 |
| 1 | 100N 100n | C_0603 | C5 |
| 1 | 2.2u | C_0603 | C5vo1 |
| 2 | 100R | R_0603 | R1, R2 |
| 1 | 2K2 2k2 | R_0402 | R3 |
| 1 | 2R7 | R_0805 | R3vi1 |
| 1 | 0R | R_0805 | R4 |
ChibiESC design files
The KiCad project lives in the joewa/ChibiESC repository on GitHub; these links point at the commit this page was built from.
ChibiESC: common questions
What microcontroller does the ChibiESC use?
The ChibiESC is built around the STM32F405RGTX, from the STM32 family.
How big is the ChibiESC PCB?
The ChibiESC measures 143.5 × 14 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the ChibiESC?
187 components, from 64 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ChibiESC design files?
From the joewa/ChibiESC repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the ChibiESC design in my own project?
Yes, under the terms of its GPL-3.0 license, which joewa chose for the repository.
Can I test firmware for the ChibiESC without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k