STM32F103C8T6-ARM-Cortex-M3-microcontroller

John-Coding-c·STM32F103C8T6-ARM-Cortex-M3-microcontroller

STM32F103C8T6-ARM-Cortex-M3-microcontroller PCB layout, top view — open source STM32 board by John-Coding-c

About the STM32F103C8T6-ARM-Cortex-M3-microcontroller PCB

STM32F103C8T6-ARM-Cortex-M3-microcontroller is an open source STM32 PCB design by John-Coding-c, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 41 × 31 mm, with 28 components from 16 distinct parts.

Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 13 capacitors, 5 resistors, 4 connectors, 2 ICs, 1 crystal and 1 switch.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

first board from few months ago

STM32F103C8T6 breakout board — USB-powered, SWD/UART/I2C headers, 41 × 31 mm, 2 layers. KiCad 10.

- MCU: STM32F103C8T6, Cortex-M3 @ 72 MHz, 64 KB flash, 20 KB RAM, LQFP-48 - Clock: 16 MHz HSE crystal (3225), 2× 10 pF load caps - Power: 5 V USB VBUS → AMS1117-3.3 LDO (1 A, SOT-223), 22 µF in/out - Decoupling: 5× 100 nF (0402) + 10 µF bulk on VDD - VDDA: filtered via 120 Ω ferrite bead + 10 nF + 1 µF - USB: full-speed device on PA11/PA12, 1.5 kΩ D+ pull-up - Boot: SPDT slide switch on BOOT0 via 10 kΩ - I2C pull-ups: 1.5 kΩ to 3.3 V - Indicator: red power LED (0603), 1.5 kΩ (~1 mA) - Mounting…

STM32F103C8T6-ARM-Cortex-M3-microcontroller, from the project README
From the project README

Main components on the STM32F103C8T6-ARM-Cortex-M3-microcontroller

STM32F103C8T6-ARM-Cortex-M3-microcontroller bill of materials (BOM)

28 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AMS1117-3.3
U1
1
STM32F103C8T6
U2
1
16MHZ
16MHz
Y1
3
CONN_01X04_MALE
Conn_01x04_Male
J1, J2, J3
1
USB_B_Micro
J4
1
SW_SPDT
SW1
1
RED
D1
1
120R
FB1
2
22U
22u
C1, C2
1
10U
10u
C3
5
100N
100n
C4, C6, C7, C9, C10
2
10P
10p
C5, C8
1
10N
10n
C11
2
1u
C12, C13
4
1K5
1k5
R1, R2, R3, R5
1
10K
10k
R4

STM32F103C8T6-ARM-Cortex-M3-microcontroller design files

The KiCad project lives in the John-Coding-c/STM32F103C8T6-ARM-Cortex-M3-microcontroller repository on GitHub; these links point at the commit this page was built from.

STM32F103C8T6-ARM-Cortex-M3-microcontroller: common questions

What microcontroller does the STM32F103C8T6-ARM-Cortex-M3-microcontroller use?

The STM32F103C8T6-ARM-Cortex-M3-microcontroller is built around the STM32F103C8T6, from the STM32 family.

How big is the STM32F103C8T6-ARM-Cortex-M3-microcontroller PCB?

The STM32F103C8T6-ARM-Cortex-M3-microcontroller measures 41 × 31 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the STM32F103C8T6-ARM-Cortex-M3-microcontroller?

28 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the STM32F103C8T6-ARM-Cortex-M3-microcontroller design files?

From the John-Coding-c/STM32F103C8T6-ARM-Cortex-M3-microcontroller repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the STM32F103C8T6-ARM-Cortex-M3-microcontroller design in my own project?

Yes, under the terms of its CERN-OHL-P-2.0 license, which John-Coding-c chose for the repository.

Can I test firmware for the STM32F103C8T6-ARM-Cortex-M3-microcontroller without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards