High res scrollwheel
Jonathan-C-L·high-res-scrollwheel·hardware/high-res-scrollwheel/high-res-scrollwheel.kicad_pcb
About the High res scrollwheel PCB
High res scrollwheel is an open source STM32 PCB design by Jonathan-C-L, published on GitHub. It is a 2-layer board measuring 59 × 44 mm, with 25 components from 17 distinct parts.
Its main chip is the STM32G0B1RETx, from the STM32 family. Other key parts include the USBLC6-2SC6, AS5600 and AMS1117-3.3. By type, the board carries 9 capacitors, 6 resistors, 4 ICs, 3 connectors, 1 crystal and 1 switch.
From the project
A high resolution scroll wheel project with up to 1 pixel per degree of rotation resolution. This was built upon the STM32 platform, with a PCB was custom made by me and the firmware was created with the help of Claude Code (primarily for USB configurations).
Main components on the High res scrollwheel
High res scrollwheel bill of materials (BOM)
25 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2SC6 | SOT-23-6 | U1 |
| 1 | AS5600 | SOIC8 | U2 |
| 1 | STM32G0B1RETx | LQFP-64_10x10mm_P0.5mm | U3 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U4 |
| 1 | NX3215SA-32.768KHz | XTAL_NX3215SA-32.768K-STD-MUA-14 | Y1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
| 1 | Conn_02x02_Odd_Even | PinHeader_2x02_P2.54mm_Vertical | J3 |
| 1 | Conn_ST_STDC14 | PinHeader_2x07_P1.27mm_Vertical_SMD | J4 |
| 1 | Reset_Btn | SW_SPST_B3U-1000P | SW1 |
| 1 | GREEN LED | LED_0603_1608Metric | D1 |
| 4 | 10u | C_0603_1608Metric | C1, C6, C7, C9 |
| 2 | 6.8p | C_0603_1608Metric | C2, C3 |
| 3 | 470n | C_0603_1608Metric | C4, C5, C8 |
| 2 | 10K | R_0603_1608Metric | R1, R2 |
| 1 | 510 | R_0603_1608Metric | R3 |
| 2 | 5.1K | R_0603_1608Metric | R6, R7 |
| 1 | 0 | R_0603_1608Metric | R8 |
High res scrollwheel design files
The KiCad project lives in the Jonathan-C-L/high-res-scrollwheel repository on GitHub; these links point at the commit this page was built from.
High res scrollwheel: common questions
What microcontroller does the High res scrollwheel use?
The High res scrollwheel is built around the STM32G0B1RETx, from the STM32 family.
How big is the High res scrollwheel PCB?
The High res scrollwheel measures 59 × 44 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the High res scrollwheel?
25 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the High res scrollwheel design files?
From the Jonathan-C-L/high-res-scrollwheel repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the High res scrollwheel design in my own project?
The repository has no license, so all rights stay with Jonathan-C-L. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the High res scrollwheel without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k