GTAG
JonathSpirit·GTAG
About the GTAG PCB
GTAG is an open source PCB design by JonathSpirit, published on GitHub under the CERN-OHL-1.2 license. It is a 2-layer board measuring 54 × 30 mm, with 14 components from 11 distinct parts.
By type, the board carries 4 resistors, 3 connectors, 3 capacitors, 2 test points, 1 switch and 1 diode.
It belongs with the usb & debug tools designs in this gallery.
From the project
A small adaptation card for the silicon-labs JTAG Debug adapter
Copyright (C) 2020 Guillaume Guillet\ Licensed under CERN OHL v.1.2
Silicon-labs USB-Debug-Adapter : https://www.silabs.com/documents/public/user-guides/8-bit-USB-Debug-Adapter.pdf

GTAG bill of materials (BOM)
14 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Connector_JTAG | IDC-Header_2x05_P2.54mm_Horizontal | J1 |
| 1 | Connector_simple | PinHeader_1x05_P2.54mm_Horizontal | J3 |
| 1 | Connector_compact | PinHeader_1x04_P2.54mm_Horizontal | J4 |
| 1 | Reset | SW_PUSH_6mm | SW1 |
| 1 | GND | TestPoint_Loop_D3.50mm_Drill1.4mm_Beaded | TP1 |
| 1 | VJTAG | TestPoint_Loop_D3.50mm_Drill1.4mm_Beaded | TP2 |
| 1 | LED_GREEN_2.2V | LED_1206_3216Metric | D1 |
| 2 | 100nF | C_1206_3216Metric | C1, C2 |
| 1 | 1uF | C_1206_3216Metric | C3 |
| 1 | 330E | R_1206_3216Metric | R1 |
| 3 | 1k | R_1206_3216Metric | R2, R3, R4 |
GTAG design files
The KiCad project lives in the JonathSpirit/GTAG repository on GitHub; these links point at the commit this page was built from.
- Layoutproject_gtag.kicad_pcb
GTAG: common questions
How big is the GTAG PCB?
The GTAG measures 54 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the GTAG?
14 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the GTAG design files?
From the JonathSpirit/GTAG repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the GTAG design in my own project?
Yes, under the terms of its CERN-OHL-1.2 license, which JonathSpirit chose for the repository.
Similar boards
USB Hub Test
osy
50 × 50 mm85 parts4LCC-BY-4.0703XG Station Power
osy
54.3 × 91 mm9 parts2LCC-BY-4.0703FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0497Adapter tsop48
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter tsop48 solder
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter soic8 solder
bbogush
48 × 20 mm3 parts2LGPL-3.0389