Capstone
Jordan-HT·Capstone·KiCad (OLD)/Capstone_Project_Mainboard/Capstone_Project_Mainboard.kicad_pcb
About the Capstone PCB
Capstone is an open source FPGA PCB design by Jordan-HT, published on GitHub. It is a 10-layer board measuring 150 × 100 mm, with 92 components from 18 distinct parts.
Its main chip is the XC7K160T-2FFG676I, from the FPGA family. Other key parts include the M24C08-RDW6TP, DSC1123CI2-156.2500T, PCA9548ABS,118 and MT25QL128ABA1ESE-0SIT. By type, the board carries 39 resistors, 37 capacitors, 6 inductors, 5 connectors, 4 ICs and 1 module.
From the project
A capstone (senior) project for my BSEE at OIT
Main components on the Capstone
Capstone bill of materials (BOM)
92 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XC7K160T-2FFG676I XC7K160T-FFG676_MIB Raspberry Pi | Xilinx_FFG676_K7_160T | U1 |
| 1 | M24C08-RDW6TP M24C08 onsemi | TSSOP-8_4.4x3mm_P0.65mm | U2 |
| 1 | DSC1123CI2-156.2500T DSC1123CI2 NXP | Microchip_6-VDFN | U3 |
| 1 | PCA9548ABS,118 PCA9548A STMicroelectronics | QFN50P400X400X100-25N-D | U4 |
| 1 | MT25QL128ABA1ESE-0SIT MT25QL128ABA1ESE Micron Technology Inc | ACA-SPI-004-K01 | A2 |
| 2 | ASP-134486-01 ASP-134486 GCT | SAMTEC_ASP-134486-01 | J1, J2 |
| 1 | 0878321420 Xilinx Cable Header Adam Tech | 0878321420 | J3 |
| 2 | U95-T151-100A QSFP+ Connector & Cage Amphenol ICC | AMPHENOL_U95T151100A | J4, J5 |
| 6 | BDCD002520121R0MS1 1u Murata Electronics | L_1008_2520Metric | L1, L2, L3, L4, L5, L6 |
| 2 | T520V337M2R5ATE025 330u Murata Electronics | CP_EIA-7343-20_Kemet-V | C1, C2 |
| 3 | GRM32ER60J107ME20L 100u Murata Electronics | C_1210_3225Metric | C3, C15, C16 |
| 6 | GRM21BR71C475KE51L 4.7u Murata Electronics | C_0805_2012Metric | C4, C5, C6, C12, C13, C17 |
| 6 | GRM32ER70J476ME20L 47u Murata Electronics | C_1206_3216Metric | C7, C8, C9, C10, C11, C14 |
| 12 | GRM155R71E104ME14J 0.1u Murata Electronics | C_0402_1005Metric | C18, C19, C21, C25, C26, C27, C28, C29 +4 |
| 8 | CL21A226MAYNNNE 22u Murata Electronics | C_0805_2012Metric | C20, C22, C23, C24, C30, C31, C32, C34 |
| 1 | MCS0402PD1000DE500 100 Panasonic | R_0402_1005Metric | R1 |
| 4 | RC0402FR-7W27RL 27 Panasonic | R_0402_1005Metric | R2, R3, R4, R5 |
| 34 | RC0402FR-074K7L 4.7k Panasonic | R_0402_1005Metric | R6, R7, R8, R9, R10, R11, R12, R13 +26 |
Capstone design files
The KiCad project lives in the Jordan-HT/Capstone repository on GitHub; these links point at the commit this page was built from.
Capstone: common questions
What microcontroller does the Capstone use?
The Capstone is built around the XC7K160T-2FFG676I, from the FPGA family.
How big is the Capstone PCB?
The Capstone measures 150 × 100 mm, has 10 copper layers and is 1.7728 mm thick.
How many components are on the Capstone?
92 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Capstone design files?
From the Jordan-HT/Capstone repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Capstone design in my own project?
The repository has no license, so all rights stay with Jordan-HT. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Capstone without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.
Similar boards
FPGA
Base board
GlasgowEmbedded
80 × 49 mm222 parts4L0BSD2.2kFPGA
Thunderscope Rev5.3
EEVengers
122.5 × 103.5 mm817 parts6LMIT1.3kFPGA
Usb sniffer
ataradov
58.2 × 38.1 mm86 parts2LBSD-3-Clause1.3kFPGA
Tomu, I'm
theacodes
13 × 9.4 mm40 parts4LMIT1.1kFPGA
Icepi zero
cheyao
65 × 30 mm143 parts4LSHL-2.1865FPGA
Gcvideo
ikorb
49 × 30 mm44 parts4LNo license765