Weather
jordan336·weather·hw/weather.kicad_pcb
About the Weather PCB
Weather is an open source STM32 PCB design by jordan336, published on GitHub under the MIT license. It is a 2-layer board measuring 101 × 61.4 mm, with 64 components from 30 distinct parts.
Its main chip is the STM32F042C6Tx, from the STM32 family. Other key parts include the AP2112K-3.3, ENC28J60-C/SS, tmp102 and Si1145. By type, the board carries 25 capacitors, 18 resistors, 7 connectors, 5 ICs, 5 diodes and 1 transistor.
From the project
Cortex-M0 Embedded Weather Station with Soil Moisture Monitoring
STM32F0 ARM Cortex M0 based weather station with temperature, UV, light, and soil moisture monitoring. The board is powered with 5V from the USB connector. The board includes a standard RJ-45 Ethernet jack with built-in magnetics. I2C, SWD, and some GPIO pins are broken out to connectors for debug and test.
Main components on the Weather
Weather bill of materials (BOM)
64 components, 30 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP2112K-3.3 | SOT-23-5_HandSoldering | U1 |
| 1 | ENC28J60-C/SS | SSOP-28_5.3x10.2mm_Pitch0.65mm | U2 |
| 1 | STM32F042C6Tx | LQFP-48_7x7mm_Pitch0.5mm | U3 |
| 1 | tmp102 | SOT-563 | U4 |
| 1 | Si1145 | 10-QFN | U5 |
| 1 | FDS8960C | SOIC-8_3.9x4.9mm_Pitch1.27mm | Q1 |
| 1 | Crystal | Crystal_SMD_HC49-SD_HandSoldering | Y1 |
| 1 | RJ45-TRANSFO | RJ45_TRANSFO | J1 |
| 1 | USB_OTG | USB_Micro-B | J2 |
| 3 | CONN_01X03 | Pin_Header_Straight_1x03_Pitch2.54mm | J3, J4, J6 |
| 2 | CONN_01X02 | Pin_Header_Straight_1x02_Pitch2.54mm | J5, J7 |
| 1 | SW_Push | SW_TH_Tactile_Omron_B3F-10xx | SW1 |
| 5 | LED_ALT | LED_1206_HandSoldering | D1, D2, D3, D4, D5 |
| 1 | Ferrite_Bead | L_Vishay_IHSM-3825 | L1 |
| 3 | 1u | C_1206_HandSoldering | C1, C17, C19 |
| 5 | 100n | C_1206_HandSoldering | C2, C3, C6, C7, C12 |
| 3 | 4.7u | C_1206_HandSoldering | C4, C8, C13 |
| 9 | 0.1u | C_1206_HandSoldering | C5, C9, C10, C14, C18, C20, C22, C23 +1 |
| 2 | 10p | C_1206_HandSoldering | C11, C15 |
| 1 | 10n | C_1206_HandSoldering | C16 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10u | C_1206_HandSoldering | C21 |
| 1 | 0.01u | C_1206_HandSoldering | C24 |
| 1 | 100k | R_1206_HandSoldering | R1 |
| 1 | 10k | R_1206_HandSoldering | R2 |
| 2 | 5.1k | R_1206_HandSoldering | R3, R4 |
| 1 | 2.32k | R_1206_HandSoldering | R5 |
| 2 | 180 | R_1206_HandSoldering | R6, R7 |
| 4 | 49.9 | R_1206_HandSoldering | R8, R9, R10, R11 |
| 5 | 470 | R_1206_HandSoldering | R12, R13, R14, R15, R16 |
| 2 | 1k | R_1206_HandSoldering | R17, R18 |
Weather design files
The KiCad project lives in the jordan336/weather repository on GitHub; these links point at the commit this page was built from.
- Layouthw/weather.kicad_pcb
Weather: common questions
What microcontroller does the Weather use?
The Weather is built around the STM32F042C6Tx, from the STM32 family.
How big is the Weather PCB?
The Weather measures 101 × 61.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Weather?
64 components, from 30 distinct parts. The full bill of materials is listed on this page.
Where can I download the Weather design files?
From the jordan336/weather repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Weather design in my own project?
Yes, under the terms of its MIT license, which jordan336 chose for the repository.
Can I test firmware for the Weather without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k