8 open source boards using the STM32F042C6Tx

Real designs built with the STM32F042C6Tx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the STM32F042C6Tx

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the STM32F042C6Tx connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pins have a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 4.7 µF).
  • The PF0 pin has a crystal on 4 of 5 designs, most often 16 MHz (then 8 MHz).
  • The PF0 pin has a capacitor to GND on 4 of 5 designs, most often 15 pF (then 18 pF).
  • The PF1 pin has a crystal on 4 of 5 designs, most often 16 MHz (then 8 MHz).
VBATpin 1Connected to: 3.3V 60% · not connected 40%
  • Decoupling capacitor on 60% · 100 nF (6), 4.7 µF (2)
PC13pin 2Connected to: Not connected 60% · a signal 40%
PC14pin 3Connected to: Not connected 60% · a signal 40%
  • Crystal on 40%
  • Capacitor to GND on 40% · 15 pF (1), 27 pF (1)
PC15pin 4Connected to: Not connected 60% · a signal 40%
  • Crystal on 40%
  • Capacitor to GND on 40% · 15 pF (1), 27 pF (1)
PF0pin 5Connected to: Signal 100%
  • Crystal on 80% · 16 MHz (2), 8 MHz (1)
  • Capacitor to GND on 80% · 15 pF (1), 18 pF (1), 22 pF (1)
PF1pin 6Connected to: Signal 100%
  • Crystal on 80% · 16 MHz (2), 8 MHz (1)
  • Capacitor to GND on 80% · 15 pF (1), 18 pF (1), 22 pF (1)
NRSTpin 7Connected to: A connector 40% · not connected 20%
  • Capacitor to GND on 80% · 100 nF (3)
  • Pull-up to 3.3V on 40% · 10 kΩ (2)
VSSApin 8Connected to: GND 100%
VDDApin 9Connected to: 3.3V 100%
  • Decoupling capacitor on 60% · 100 nF (5), 10 nF (1), 1 µF (1)
PB10pin 21Connected to: Not connected 60% · a signal 40%
VSSpin 23, 35, 47Connected to: GND 100%
VDDpin 24, 48Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (11), 4.7 µF (3), 10 nF (1)
PA11pin 32Connected to: Signal 80% · not connected 20%
  • Series resistor on 40% · 22 Ω (2)
PA12pin 33Connected to: Signal 80% · not connected 20%
  • Series resistor on 40% · 22 Ω (2)
VDDIO2pin 36Connected to: 3.3V 100%
  • Decoupling capacitor on 80% · 100 nF (6), 4.7 µF (2)
PA15pin 38Connected to: Not connected 60% · a signal 40%
PB5pin 41Connected to: Not connected 60% · a signal 40%
PF11pin 44Connected to: Signal 80% · not connected 20%
  • Resistor to GND on 60% · 510 Ω (1), 220 Ω (1), 10 kΩ (1)

27 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FalCAN by AndersBNielsen, Isoblue by oats-center, Stm32 mech keyboard by julbouln and LUT by eddyem.

The STM32F042C6Tx in open source designs

The gallery holds 8 open source boards using the STM32F042C6Tx from 6 GitHub repositories; a typical one measures about 108 × 74 mm and carries around 85 components.

71% are two-layer designs, the rest use four layers or more, and 63% carry an open source license.

The most starred is FalCAN by AndersBNielsen.

Parts used alongside the STM32F042C6Tx

Microcontrollers on boards using the STM32F042C6Tx

What boards using the STM32F042C6Tx are built for

STM32F042C6Tx: common questions

Where can I find a STM32F042C6Tx reference design?

Each of the 8 boards on this page is a real design using the STM32F042C6Tx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the STM32F042C6Tx VDD pin?

The VDD pins have a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 5 open source designs using the STM32F042C6Tx.

How is the STM32F042C6Tx PF0 pin connected?

The PF0 pin has a crystal on 4 of 5 designs, most often 16 MHz (then 8 MHz). Counted from the KiCad layouts of 5 open source designs using the STM32F042C6Tx.

How is the STM32F042C6Tx PF1 pin connected?

The PF1 pin has a crystal on 4 of 5 designs, most often 16 MHz (then 8 MHz). Counted from the KiCad layouts of 5 open source designs using the STM32F042C6Tx.

Which microcontrollers do boards using the STM32F042C6Tx use?

Most are built on STM32 (8).

How big is a typical board using the STM32F042C6Tx?

The median is 108 × 74 mm, and 71% are two-layer designs.

What is the most popular open source board using the STM32F042C6Tx?

By GitHub stars, FalCAN by AndersBNielsen, with 48 stars.

Can I simulate one of these boards using the STM32F042C6Tx before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part