Rf cc1101-esp32

josevas72·rf-cc1101-esp32·hardware/pcb/kicad/rf_cc1101.kicad_pcb

Rf cc1101-esp32 PCB layout, top view — open source board by josevas72

About the Rf cc1101-esp32 PCB

Rf cc1101-esp32 is an open source PCB design by josevas72, published on GitHub under the MIT license. It is a 2-layer board measuring 58.4 × 53.3 mm, with 8 components from 8 distinct parts.

Other key parts include the XIAO_ESP32-C6 (izq), XIAO_ESP32-C6 (der), C3_SuperMini girado (izq), C3_SuperMini girado (der) and E07-M1101D. By type, the board carries 5 ICs, 2 capacitors and 1 connector.

It belongs with the iot & wireless, rf & radio and sensors designs in this gallery.

From the project

Emisor/receptor RF 433 MHz con ESP32 + CC1101 para Home Assistant (PCB KiCad, ESPHome, caja 3D)

Emisor/receptor de radiofrecuencia a 433,92 MHz con un ESP32 y el módulo CC1101 (E07-M1101D), pensado para Home Assistant mediante ESPHome. Sirve para controlar por RF persianas, luces, enchufes o ventiladores con mando, y para escuchar el mando original y mantener sincronizado el estado.

El repositorio incluye todo lo necesario para reproducirlo: la placa (PCB) en KiCad con sus archivos de fabricación, el firmware (plantilla ESPHome) y una caja imprimible en 3D.

Rf cc1101-esp32, from the project README
From the project README

Main components on the Rf cc1101-esp32

XIAO_ESP32-C6 (izq)XIAO_ESP32-C6 (der)C3_SuperMini girado (izq)C3_SuperMini girado (der)E07-M1101D

Rf cc1101-esp32 bill of materials (BOM)

8 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO_ESP32-C6 (izq)
U1A
1
XIAO_ESP32-C6 (der)
U1B
1
C3_SuperMini girado (izq)
U2A
1
C3_SuperMini girado (der)
U2B
1
E07-M1101D
U3
1
I2C sensor
J1
1
10uF
C1
1
100nF
C2

Rf cc1101-esp32 design files

The KiCad project lives in the josevas72/rf-cc1101-esp32 repository on GitHub; these links point at the commit this page was built from.

Rf cc1101-esp32: common questions

How big is the Rf cc1101-esp32 PCB?

The Rf cc1101-esp32 measures 58.4 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Rf cc1101-esp32?

8 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Rf cc1101-esp32 design files?

From the josevas72/rf-cc1101-esp32 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Rf cc1101-esp32 design in my own project?

Yes, under the terms of its MIT license, which josevas72 chose for the repository.

Similar boards