HardLabs

ArduinoNanoDev

joshajohnson·CBRhardware·uC101/Hardware/arduinoNanoDev.kicad_pcb

ArduinoNanoDev PCB layout, top view — open source AVR/Arduino board by joshajohnson

About the ArduinoNanoDev PCB

ArduinoNanoDev is an open source AVR/Arduino PCB design by joshajohnson, published on GitHub. It is a 2-layer board measuring 100 × 48 mm, with 39 components from 14 distinct parts.

Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. By type, the board carries 14 resistors, 11 connectors, 10 diodes, 2 switches and 1 module.

It belongs with the usb & debug tools designs in this gallery.

From the project

A monthly hardware meetup for anyone interested in electronics / hardware.

Run blink.ino and confirm that the onboard LED is blinking

Embedded FM Podcast Look through old episodes for fundamentals Making Embedded Systems Josh has a copy you can borrow Google 'problem' + avr Adafruit Sparkfun HW and SW resources

http://www.wch.cn/download/CH341SER_ZIP.html

This is due to a CH340G USB to serial chip being used on the Arduino Nano.

Main components on the ArduinoNanoDev

Arduino_Nano_v3.x

ArduinoNanoDev bill of materials (BOM)

39 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Arduino_Nano_v3.x
A1
1
Serial / UART
J1
1
SPI Header
J2
1
I2C Header
J3
1
SAO_Conn
J4
4
Conn_01x10
J5, J6, J7, J8
3
Conn_01x04
J9, J10, J11
1
10K Pot
RV1(A6)
2
SW_Push
SW1(D2), SW2(D4)
1
LED_RAGB
D1
9
LED
D2, D3, D4, D5, D6, D7, D8, D9 +1
5
220R
10K
R1, R2, R3, R13, R14
7
220R
330R
R4, R5, R6, R7, R8, R9, R10
2
220R
4K7
R11, R12

ArduinoNanoDev design files

The KiCad project lives in the joshajohnson/CBRhardware repository on GitHub; these links point at the commit this page was built from.

ArduinoNanoDev: common questions

What microcontroller does the ArduinoNanoDev use?

The ArduinoNanoDev is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.

How big is the ArduinoNanoDev PCB?

The ArduinoNanoDev measures 100 × 48 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ArduinoNanoDev?

39 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ArduinoNanoDev design files?

From the joshajohnson/CBRhardware repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the ArduinoNanoDev design in my own project?

The repository has no license, so all rights stay with joshajohnson. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ArduinoNanoDev without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in CBRhardware

Similar boards