Gain Block Dev Rev 0
About the Gain Block Dev Rev 0 PCB
Gain Block Dev Rev 0 is an open source PCB design by joshajohnson, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 48 × 48 mm, with 41 components from 22 distinct parts.
Other key parts include the PE43711, LP5907MFX-3.3, AD8319 and HMC313. By type, the board carries 19 resistors, 12 capacitors, 4 ICs, 4 connectors, 1 switch and 1 inductor.
From the project
25MHz to 1.25GHz Vector Network Analyser
Design is feature complete, but not suitable for use. Due to hardware issues the error is unacceptably large, and as such I can not recommend assembling one of these.
Main components on the Gain Block Dev Rev 0
Gain Block Dev Rev 0 bill of materials (BOM)
41 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PE43711 | QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.6mm_ThermalVias | U1 |
| 1 | LP5907MFX-3.3 | SOT-23-5 | U3 |
| 1 | AD8319 | DFN-8-1EP_2x3mm_P0.5mm_EP0.61x2.2mm | U4 |
| 1 | HMC313 | SOT-23-6 | U5 |
| 1 | USB_B_Micro | MicroUSB_Aliexpress | J1 |
| 1 | RF_IN | SMA_EDGE_MOUNT | J2 |
| 1 | Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | RF_OUT | SMA_EDGE_MOUNT | J4 |
| 1 | SW_DIP_x08 | SW_DIP_SPSTx08_Slide_9.9x21.7mm_W7.8mm_P2.54mm | SW1 |
| 1 | 22n | L_0402_1005Metric | L1 |
| 2 | 100n | C_0402_1005Metric | C2, C13 |
| 5 | 100p | C_0402_1005Metric | C3, C5, C8, C9, C14 |
| 2 | 1u | C_0402_1005Metric | C6, C7 |
| 1 | 8.2p | C_0402_1005Metric | C10 |
| 2 | 47n | C_0402_1005Metric | C11, C12 |
| 8 | 10k | R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8 |
| 3 | 16 | R_0402_1005Metric | R9, R10, R11 |
| 4 | OPT | R_0402_1005Metric | R12, R14, R17, R18 |
| 1 | 0 | R_0402_1005Metric | R13 |
| 1 | 18k | R_0402_1005Metric | R15 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 52.3 | R_0402_1005Metric | R16 |
| 1 | 1k | R_0402_1005Metric | R19 |
Gain Block Dev Rev 0 design files
The KiCad project lives in the joshajohnson/vna repository on GitHub; these links point at the commit this page was built from.
Gain Block Dev Rev 0: common questions
How big is the Gain Block Dev Rev 0 PCB?
The Gain Block Dev Rev 0 measures 48 × 48 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Gain Block Dev Rev 0?
41 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Gain Block Dev Rev 0 design files?
From the joshajohnson/vna repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Gain Block Dev Rev 0 design in my own project?
Yes, under the terms of its GPL-3.0 license, which joshajohnson chose for the repository.
More boards in vna
STM32VNA
100 × 66 mm207 parts2LGPL-3.025
MAX2870/2871 Dev Board
48 × 48 mm46 parts4LGPL-3.025
MeasurementCard
45 × 100 mm32 parts2LGPL-3.025
Filter Bank Dev Board
48 × 48 mm20 parts4LGPL-3.025
TRF37A75 Dev Rev 0
48 × 48 mm15 parts4LGPL-3.025
Ecal
30 × 30 mm14 parts2LGPL-3.025
ADC-15-4 Dev Board
48 × 48 mm9 parts4LGPL-3.025
ADC-15-4 Dev Board
50 × 44.3 mm7 parts2LGPL-3.025