HardLabs

VersaWriter

jp3cyc·versaWriter·circuit/verseWriter.kicad_pcb

VersaWriter PCB layout, top view — open source AVR/Arduino board by jp3cyc

About the VersaWriter PCB

VersaWriter is an open source AVR/Arduino PCB design by jp3cyc, published on GitHub under the MIT license. It is a 2-layer board measuring 60 × 120 mm, with 34 components from 10 distinct parts.

Its main chip is the ATMEGA328P-A, from the AVR/Arduino family. By type, the board carries 13 resistors, 12 diodes, 4 capacitors, 2 battery holders, 1 crystal and 1 connector.

It belongs with the displays & leds designs in this gallery.

From the project

バーサライター

- verseWriter-cache.lib ライブラリファイル - verseWriter.bak バックアップファイル - verseWriter.kicad_pcb 基板データ - verseWriter.pdf 回路図データpdf版 - verseWriter.pro KiCadプロジェクトファイル - verseWriter.sch 回路図データ

VersaWriter bill of materials (BOM)

34 components, 10 distinct parts.

QtyPartRefs
1
16M
Y1
1
IR
P3
1
ATMEGA328P-A
ATMEGA38
2
AAA
BT1, BT2
12
LED
D1, D2, D3, D4, D5, D6, D7, D8 +4
1
C
C1
2
22p
C2, C3
1
100n
C4
12
330
R1, R2, R3, R4, R5, R6, R7, R8 +4
1
1k
R13

VersaWriter design files

The KiCad project lives in the jp3cyc/versaWriter repository on GitHub; these links point at the commit this page was built from.

VersaWriter: common questions

What microcontroller does the VersaWriter use?

The VersaWriter is built around the ATMEGA328P-A, from the AVR/Arduino family.

How big is the VersaWriter PCB?

The VersaWriter measures 60 × 120 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the VersaWriter?

34 components, from 10 distinct parts. The full bill of materials is listed on this page.

Where can I download the VersaWriter design files?

From the jp3cyc/versaWriter repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the VersaWriter design in my own project?

Yes, under the terms of its MIT license, which jp3cyc chose for the repository.

Can I test firmware for the VersaWriter without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards