HHW HackConRD2024
About the HHW HackConRD2024 PCB
HHW HackConRD2024 is an open source AVR/Arduino PCB design by jrgdiaz, published on GitHub. It is a board, with 33 components from 14 distinct parts.
Its main chip is the ATTINY85-20S, from the AVR/Arduino family. By type, the board carries 10 diodes, 9 capacitors, 4 resistors, 2 connectors, 2 switches and 1 IC.
It belongs with the wearables designs in this gallery.
From the project
HackConRD 2024 Badge
Este repositorio contiene la documentacion para el badge oficial del HackConRD 2024.
This repository contains the documentation for the official HackConRD 2024 badge.
Los badges son una expresión artística de la cultura hacker, son impulsados por la comunidad y dentro de ella se convierten en piezas memorables de colección. Este nicho/dinámica es popularmente conocida como "Badgelife". En esta primera iteración del badge oficial del HackConRD utilizamos el logo de la conferencia marcando así el inicio del Badgelife en nuestro hogar y querida comunidad del HackConRD <3.
Main components on the HHW HackConRD2024
HHW HackConRD2024 bill of materials (BOM)
33 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATTINY85-20S ATtiny85-20S | SOIC-8W_5.3x5.3mm_P1.27mm | U1 |
| 1 | NPN | TSOT-23 | Q1 |
| 1 | CONN_01X06 Conn_01x06 | PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | CONN_01X03_PIN Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Battery | BatteryHolder_Keystone_2479_3xAAA | BT1 |
| 1 | Buzzer | Buzzer_CUI_CPT-9019S-SMT | BZ1 |
| 2 | MountingHole | MountingHole_4.5mm | H1, H2 |
| 1 | SW_Push | SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1 |
| 1 | SW_SPDT | SW_SPDT_PCM12 | SW2 |
| 9 | NeoPixel_THT | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5, D6, D7, D8 +1 |
| 1 | LED | LED_0603_1608Metric | D10 |
| 9 | 0.1UF 0.1uF | C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8 +1 |
| 2 | 330 | R_0603_1608Metric | R1, R4 |
| 2 | 10K | R_0603_1608Metric | R2, R3 |
HHW HackConRD2024 design files
The KiCad project lives in the jrgdiaz/HHW_HackConRD2024 repository on GitHub; these links point at the commit this page was built from.
HHW HackConRD2024: common questions
What microcontroller does the HHW HackConRD2024 use?
The HHW HackConRD2024 is built around the ATTINY85-20S, from the AVR/Arduino family.
How many components are on the HHW HackConRD2024?
33 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the HHW HackConRD2024 design files?
From the jrgdiaz/HHW_HackConRD2024 repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.
Can I use the HHW HackConRD2024 design in my own project?
The repository has no license, so all rights stay with jrgdiaz. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the HHW HackConRD2024 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/ArduinoModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoV4
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoEasyduino Atmega
Hanqaqa
68.8 × 53.6 mm35 parts4LCERN-OHL-P-2.0746
AVR/ArduinoEasyduino Atmega Nano
43.4 × 18 mm30 parts4LCERN-OHL-P-2.0746
AVR/ArduinoUsbGpib
xyphro
54 × 15 mm21 parts2LMIT683
AVR/ArduinoLumberjack
peej
284.7 × 94.2 mm149 parts2LMIT402