NIRVA---GitHub
jsrsinchana241ec253·NIRVA---GitHub·kicad/NIRVA_final.kicad_sch
About the NIRVA---GitHub PCB
NIRVA---GitHub is an open source STM32 PCB design by jsrsinchana241ec253, published on GitHub. It is a board, with 15 components from 12 distinct parts.
Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the LM35-D, DHT11 and MAX30102. By type, the board carries 6 resistors, 4 ICs, 3 connectors and 2 diodes.
It belongs with the sensors, rf & radio and wearables designs in this gallery.
From the project
Wearable safety monitor for underground coal-mine workers. Vishwakarma Awards 2026, Application ID VK26-IITH-SM-0280 (Sustainable Mining: Worker Health, Safety & Environmental Hazard Tracking).
Wearable safety monitor for underground coal-mine workers. Vishwakarma Awards 2026, Application ID VK26-IITH-SM-0280 (Sustainable Mining: Worker Health, Safety & Environmental Hazard Tracking).
Team: Sinchana R (ECE, 3rd year) and Sanjitha LP (Mining Engineering, 3rd year), NITK Surathkal.
A two-part wearable built around one STM32F103C8T6 (Blue Pill):
- Wrist module: MAX30102 (heart rate, SpO2, I2C) and LM35 (skin temperature, analog). - Pod (chest or helmet): MQ-series gas sensors (methane or combustible gas, CO), DHT11 (ambient temperature and humidity, supporting context), buzzer and…
Main components on the NIRVA---GitHub
NIRVA---GitHub bill of materials (BOM)
15 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F103C8T6 | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | LM35-D | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | DHT11 | Aosong_DHT11_5.5x12.0_P2.54mm | U3 |
| 1 | MAX30102 | Maxim_OLGA-14_3.3x5.6mm_P0.8mm | U4 |
| 1 | MQ4 | J1 | |
| 1 | MQ7 | J2 | |
| 1 | CP2102 USB to TTL module | J3 | |
| 1 | LED_GREEN | D1 | |
| 1 | LED_RED | D2 | |
| 2 | 10k | R1, R3 | |
| 2 | 20k | R2, R4 | |
| 2 | 330 | R5, R6 |
NIRVA---GitHub design files
The KiCad project lives in the jsrsinchana241ec253/NIRVA---GitHub repository on GitHub; these links point at the commit this page was built from.
- Schematickicad/NIRVA_final.kicad_sch
NIRVA---GitHub: common questions
What microcontroller does the NIRVA---GitHub use?
The NIRVA---GitHub is built around the STM32F103C8T6, from the STM32 family.
How many components are on the NIRVA---GitHub?
15 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the NIRVA---GitHub design files?
From the jsrsinchana241ec253/NIRVA---GitHub repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the NIRVA---GitHub design in my own project?
The repository has no license, so all rights stay with jsrsinchana241ec253. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the NIRVA---GitHub without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k