170 open source boards using the DHT11

Real designs built with the DHT11, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

170 boardsClear filters|Most starred

How designs wire the DHT11

Read from the KiCad layouts of 156 open source designs, one per repository: what each pin of the DHT11 connects to, and the resistors, capacitors and other passives placed on it.

  • The DATA_2 pin has a pull-up to 3.3V on 134 of 156 designs, most often 10 kΩ (then 4.7 kΩ).
  • The NC_3 pin is left unconnected on 151 of 155 designs (GND on 3).
VDD_1pin 1Connected to: 3.3V 92%
DATA_2pin 2Connected to: The microcontroller 79%
  • Pull-up to 3.3V on 86% · 10 kΩ (113), 4.7 kΩ (5), 5 kΩ (4)
NC_3pin 3Connected to: Not connected 97%
GND_4pin 4Connected to: GND 97%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FunHomeLight by ZhiFun, Light control by matthewlai, Kits by Poluino and Environment Controller KiCad THT by ArtoLabs.

The DHT11 in open source designs

The gallery holds 170 open source boards using the DHT11 from 160 GitHub repositories; a typical one measures about 98 × 84.5 mm and carries around 7 components.

98% are two-layer designs, the rest use four layers or more, and 16% carry an open source license.

The most starred is FunHomeLight by ZhiFun.

DHT11: common questions

Where can I find a DHT11 reference design?

Each of the 170 boards on this page is a real design using the DHT11. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the DHT11 DATA_2 pin?

The DATA_2 pin has a pull-up to 3.3V on 134 of 156 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 156 open source designs using the DHT11.

How is the DHT11 NC_3 pin connected?

The NC_3 pin is left unconnected on 151 of 155 designs (GND on 3). Counted from the KiCad layouts of 156 open source designs using the DHT11.

What parts are used alongside the DHT11?

The XIAO-ESP32-C3-SMD, AMS1117-3.3, ESP-12F, ESP32-WROOM-32 and ESP32-C3-WROOM-02 appear in the most repositories here.

Which microcontrollers do boards using the DHT11 use?

Most are built on ESP32 (145), ESP8266 (10), AVR/Arduino (5) and RP2040/RP2350 (2).

How big is a typical board using the DHT11?

The median is 98 × 84.5 mm, and 98% are two-layer designs.

What is the most popular open source board using the DHT11?

By GitHub stars, FunHomeLight by ZhiFun, with 29 stars.

Can I simulate one of these boards using the DHT11 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part