Glue
About the Glue PCB
Glue is an open source PCB design by jtsiomb, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 23 × 37 mm, with 6 components from 3 distinct parts.
Other key parts include the 74LS04 and 74LS32. By type, the board carries 4 ICs and 2 connectors.
From the project
Homebrew Motorola 68010 computer
Homebrew 68k computer project 1 ===============================
About ----- The purpose of this project is to design a minimal but useful homebrew computer, based on the Motorola 68010 16/32-bit processor.
The current hardware design is broken into a main processor board, and an I/O and expansion board with an AVR microcontroller playing the role of UART, timer, and RTC all in one.
Main components on the Glue
Glue bill of materials (BOM)
6 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74LS04 | SOIC-14_3.9x8.7mm_Pitch1.27mm | U1 |
| 3 | 74LS32 | SOIC-14_3.9x8.7mm_Pitch1.27mm | U2, U3, U4 |
| 2 | CONN_01X08 | Pin_Header_Straight_1x08 | P1, P2 |
Glue design files
The KiCad project lives in the jtsiomb/m68kcomputer repository on GitHub; these links point at the commit this page was built from.
- Layouthw/glue.kicad_pcb
Glue: common questions
How big is the Glue PCB?
The Glue measures 23 × 37 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Glue?
6 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the Glue design files?
From the jtsiomb/m68kcomputer repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Glue design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which jtsiomb chose for the repository.
