267 open source boards using the 74LS32
Real designs built with the 74LS32, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687Raemixx500
SukkoPera
365.8 × 254 mm349 parts2LNo license313Instruction
jes
237.5 × 102.9 mm110 parts2LUnlicense301SCOPETREX
schlae
177.8 × 127 mm197 parts2LNo license245Raspberry Pi
Apple2-IO-RPi
tjboldt
89.5 × 77.5 mm24 parts2LMIT13868000
jefftranter
134.6 × 208.3 mm90 parts2LNo license132ProDOS-ROM-Drive
tjboldt
85.7 × 54 mm17 parts2LMIT77Amiga-SMD-500
amigalisa
368.3 × 254 mm556 parts2LCERN-OHL-S-2.069CGA Redux
hkzlab
337.6 × 105.7 mm168 parts4LCC-BY-NC-4.056Zeta sbc
skiselev
170.2 × 100 mm74 partsGPL-3.051TI99 22
danwerner21
350 × 224.3 mm242 parts2LNo license50AVR/Arduino
ISACard
profdc9
189.7 × 95.9 mm99 parts2LCC-BY-SA-4.046LanguageCard
btb
100 × 77.5 mm37 parts2LApache-2.044HEC-Model-Z1
Andy18650
243.8 × 170.2 mm113 parts4LGPL-3.036Tandy1000ex hx ram
misterblack1
57.2 × 84.5 mm17 parts2LNo license36Kicad amiga2000
rhaamo
416.3 × 345.8 mm537 parts2LCC0-1.033Retroii
jonthomasson
330.2 × 215.9 mm295 parts4LNo license33Sg1000
barbeque
162.2 × 134.6 mm71 parts2LCC-BY-NC-4.033Eda designs
kyllikki
237.5 × 171.5 mm148 parts2LMIT32We816
danwerner21
360.1 × 141.4 mm128 parts2LNo license32M68kcomp1
jtsiomb
159.5 × 99.8 mm50 parts2LCC-BY-SA-4.032IBMExtender
schlae
203.2 × 105.4 mm43 parts4LNo license32Z80VDP1B
lynchaj
100 × 100 mm93 parts2LNo license31Yddraig
ddraig68k
340 × 210 mm214 parts4LMIT29MSX-BEER
msx-solis
101.6 × 65.3 mm16 parts2LGPL-3.028SegaCD Ramcart
WindDrake
83.8 × 61.5 mm20 parts2LNo license27C128-mmu-256k exp
ytmytm
48.3 × 90.2 mm12 parts2LMIT26Diego 500 5 slot
CRG-Glen
195 × 140 mm131 parts4LCERN-OHL-S-2.025BeanZee
PainfulDiodes
103.6 × 79.8 mm30 parts2LMIT23ZX-Spectrum-Issue-4B
iansbremner
213.4 × 130.8 mm199 parts2LNo license226809v2
jbevren
99.1 × 99.1 mm52 parts2LNo license22RetroZ SBC for S80
formix
127 × 73.7 mm48 parts2LApache-2.022- schematic only · 89 parts
Proton Turbo XT
skiselev
89 partsNo license22 - schematic only · 85 parts
TI99-Motherboard
rkrenicki
85 partsNo license20 Amiga 2000R6
iansbremner
416.8 × 346.1 mm553 parts2LNo license19- schematic only · 419 parts
Retro-Schematics
omega9380
419 partsMIT19
How designs wire the 74LS32
Read from the KiCad layouts of 179 open source designs, one per repository: what each pin of the 74LS32 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 90 of 179 designs, most often 100 nF (then 10 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 7 | Connected to: GND 97% | — |
| VCCpin 14 | Connected to: 5V 96% |
|
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Snark barker by schlae, Raemixx500 by SukkoPera, Alu by jes and SCOPETREX by schlae.
The 74LS32 in open source designs
The gallery holds 267 open source boards using the 74LS32 from 198 GitHub repositories; a typical one measures about 130.8 × 100 mm and carries around 59 components.
83% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is Snark barker by schlae.
Parts used alongside the 74LS32
Microcontrollers on boards using the 74LS32
What boards using the 74LS32 are built for
74LS32: common questions
Where can I find a 74LS32 reference design?
Each of the 267 boards on this page is a real design using the 74LS32. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LS32 VCC pin?
The VCC pin has a decoupling capacitor on 90 of 179 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 179 open source designs using the 74LS32.
What parts are used alongside the 74LS32?
The 74LS04, 74LS08, 74LS138, 74LS245 and 74LS00 appear in the most repositories here.
Which microcontrollers do boards using the 74LS32 use?
Most are built on AVR/Arduino (15), PIC (3), RP2040/RP2350 (1) and Raspberry Pi (1).
How big is a typical board using the 74LS32?
The median is 130.8 × 100 mm, and 83% are two-layer designs.
What is the most popular open source board using the 74LS32?
By GitHub stars, Snark barker by schlae, with 687 stars.
Can I simulate one of these boards using the 74LS32 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.