Panelized
About the Panelized PCB
Panelized is an open source STM32 PCB design by jumper385, published on GitHub. It is a 2-layer board measuring 94 × 100.6 mm, with 29 components from 18 distinct parts.
Its main chip is the STM32F042G6UX, from the STM32 family. Other key parts include the NCP1117ST33T3G and SN65HVD233. By type, the board carries 12 capacitors, 7 connectors, 4 resistors, 3 ICs, 2 diodes and 1 crystal.
From the project
custom stm32f042 microcontroller board
Main components on the Panelized
Panelized bill of materials (BOM)
29 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NCP1117ST33T3G | SOT-223 | U1 |
| 1 | STM32F042G6UX STM32F042G6Ux | QFN-28_4x4mm_P0.5mm | U2 |
| 1 | SN65HVD233 | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | CRYSTAL_GND24 Crystal_GND24 | Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | CONN_01X05_MALE Conn_01x05_Male | PinHeader_1x05_P2.54mm_Vertical | J1 |
| 4 | CONN_01X02_MALE Conn_01x02_Male | PinHeader_1x02_P2.54mm_Vertical | J2, J4, J5, J7 |
| 1 | CONN_01X08_MALE Conn_01x08_Male | PinHeader_1x08_P2.54mm_Vertical | J3 |
| 1 | CONN_01X06_MALE Conn_01x06_Male | PinHeader_1x06_P2.54mm_Vertical | J6 |
| 2 | 160-1579-1 GREEN | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2 |
| 3 | 100NF 100nF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C9, C10 |
| 2 | 12PF 12pF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2, C3 |
| 2 | 10UF 10uF | CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C4, C7 |
| 2 | 4.7UF 4.7uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C5, C11 |
| 1 | 10NF 10nF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C6 |
| 2 | 1UF 1uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C8, C12 |
| 2 | 47R | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2 |
| 1 | 270R 270 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3 |
| 1 | 120R | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4 |
Panelized design files
The KiCad project lives in the jumper385/stm32f042_microcontroller repository on GitHub; these links point at the commit this page was built from.
Panelized: common questions
What microcontroller does the Panelized use?
The Panelized is built around the STM32F042G6UX, from the STM32 family.
How big is the Panelized PCB?
The Panelized measures 94 × 100.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Panelized?
29 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Panelized design files?
From the jumper385/stm32f042_microcontroller repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Panelized design in my own project?
The repository has no license, so all rights stay with jumper385. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Panelized without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in stm32f042_microcontroller
Similar boards
STM32AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7k
STM32AIOC
skuep
21 × 31.5 mm47 parts2LMIT1.4k
STM32Ferris
pierrechevalier83
208.8 × 86.8 mm102 parts2LSHL-2.11.3k
STM32Module 16S
stuartpittaway
71.1 × 89.6 mm113 parts4LCC-BY-NC-4.01.1k
STM32Djinn
tzarc
192.3 × 150.5 mm216 parts2LCERN-OHL-S-2.0988
STM32Ghoul
228.6 × 79.4 mm163 parts2LCERN-OHL-S-2.0988