11 open source boards using the SN65HVD233
Real designs built with the SN65HVD233, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Draco
xdandys
47.5 × 62 mm173 parts4LNo license8STM32
SkateLightMainBoard
dannyandreev
45 × 63.8 mm68 parts4LAGPL-3.02RP2040/RP2350
Solarpump
rivimey
100 × 160 mm424 parts4LNo license1STM32
Hyperion
AerodyneLabs
90.2 × 95.9 mm72 parts4LNo license1STM32
Panelized2
jumper385
74.9 × 98 mm30 parts2LNo license1STM32
Pdmv2
jumper385
94 × 90.2 mm102 parts4LNo license0STM32
Board for-Relay-Card
chapppy
102 × 84 mm76 parts2LGPL-3.00ESP32
Typhoon Motherboard
hpvdt
73.5 × 52.8 mm51 parts2LNo license1STM32
Custom microcontroller
jumper385
27.9 × 47.8 mm29 parts2LNo license1STM32
Panelized
jumper385
94 × 100.6 mm29 parts2LNo license1FacePlate
sfunderbots
129.6 × 45 mm46 parts4LNo license0
How designs wire the SN65HVD233
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the SN65HVD233 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 8 of 9 designs, most often 100 nF (then 1 µF).
- The CANL pin has a series resistor on 8 of 9 designs, most often 120 Ω (then 60 Ω).
- The CANH pin has a series resistor on 7 of 9 designs, most often 120 Ω (then 60 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 2 | Connected to: GND 100% | — |
| VCCpin 3 | Connected to: 3.3V 100% |
|
| CANLpin 6 | Connected to: A connector 78% |
|
| CANHpin 7 | Connected to: A connector 78% |
|
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Draco by xdandys, SkateLightMainBoard by dannyandreev, Hyperion by AerodyneLabs and Typhoon Motherboard KiCad by hpvdt.
The SN65HVD233 in open source designs
The gallery holds 11 open source boards using the SN65HVD233 from 9 GitHub repositories; a typical one measures about 90.2 × 84 mm and carries around 68 components.
55% use four copper layers or more, and 18% carry an open source license.
The most starred is Draco by xdandys.
Microcontrollers on boards using the SN65HVD233
What boards using the SN65HVD233 are built for
SN65HVD233: common questions
Where can I find a SN65HVD233 reference design?
Each of the 11 boards on this page is a real design using the SN65HVD233. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SN65HVD233 VCC pin?
The VCC pin has a decoupling capacitor on 8 of 9 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 9 open source designs using the SN65HVD233.
What resistor goes on the SN65HVD233 CANL pin?
The CANL pin has a series resistor on 8 of 9 designs, most often 120 Ω (then 60 Ω). Counted from the KiCad layouts of 9 open source designs using the SN65HVD233.
What resistor goes on the SN65HVD233 CANH pin?
The CANH pin has a series resistor on 7 of 9 designs, most often 120 Ω (then 60 Ω). Counted from the KiCad layouts of 9 open source designs using the SN65HVD233.
Which microcontrollers do boards using the SN65HVD233 use?
Most are built on STM32 (8), ESP32 (1) and RP2040/RP2350 (1).
How big is a typical board using the SN65HVD233?
The median is 90.2 × 84 mm, and 45% are two-layer designs.
What is the most popular open source board using the SN65HVD233?
By GitHub stars, Draco by xdandys, with 8 stars.
Can I simulate one of these boards using the SN65HVD233 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.