HardLabs

Libre-MiG Face Plate

JustEnoughDucks·LibreMiG-S·Electronics/source/separate_pcbs/libre-MiG Face Plate/libre-MiG Face Plate.kicad_pcb

Libre-MiG Face Plate PCB layout, top view — open source board by JustEnoughDucks
Simulate this board

About the Libre-MiG Face Plate PCB

Libre-MiG Face Plate is an open source PCB design by JustEnoughDucks, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 46.9 × 54.7 mm, with 13 components from 7 distinct parts.

By type, the board carries 7 capacitors, 3 switches and 2 connectors.

From the project

Open Source Joystick/Open Source Flightstick that combines the Olukelu Gimbal with a MiG-31 inspired Flightstick designed for Star Citizen or space simulators

I saw few options for open-source flight sticks out there. Commercial options are exceedingly expensive. I strive to build a full-featured and high-quality Flightstick with a target BOM cost from 150-200€. It is not meant to be the cheapest joystick, but it does aim to be the most attractive option for open-source and DIY enthusiasts.

BOMs, parts lists, and documentation for various gimbals and 3D printed joysticks are sparse at best. I aim to include an extremely comprehensive requirements list, drop-in replacement part list, etc... so that this will be as accessible to everyone who has…

Libre-MiG Face Plate bill of materials (BOM)

13 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CONN_01X08
Conn_01x08
J19
1
CONN_01X03
Conn_01x03
J20
1
SW_Push
SW1
1
SW_Push
SW16
1
SKRHABE010
SW17
1
Joystick_Pot
VR1
7
100NF
100nF
C26, C27, C28, C29, C30, C31, C32

Libre-MiG Face Plate design files

The KiCad project lives in the JustEnoughDucks/LibreMiG-S repository on GitHub; these links point at the commit this page was built from.

Libre-MiG Face Plate: common questions

How big is the Libre-MiG Face Plate PCB?

The Libre-MiG Face Plate measures 46.9 × 54.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Libre-MiG Face Plate?

13 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Libre-MiG Face Plate design files?

From the JustEnoughDucks/LibreMiG-S repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Libre-MiG Face Plate design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which JustEnoughDucks chose for the repository.

More boards in LibreMiG-S