HardLabs

Libre-MiG trigger

JustEnoughDucks·LibreMiG-S·Electronics/source/separate_pcbs/libre-MiG trigger/libre-MiG trigger.kicad_pcb

Libre-MiG trigger PCB layout, top view — open source board by JustEnoughDucks

About the Libre-MiG trigger PCB

Libre-MiG trigger is an open source PCB design by JustEnoughDucks, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 18 × 35 mm, with 5 components from 3 distinct parts.

By type, the board carries 2 switches, 2 resistors and 1 connector.

From the project

Open Source Joystick/Open Source Flightstick that combines the Olukelu Gimbal with a MiG-31 inspired Flightstick designed for Star Citizen or space simulators

I saw few options for open-source flight sticks out there. Commercial options are exceedingly expensive. I strive to build a full-featured and high-quality Flightstick with a target BOM cost from 150-200€. It is not meant to be the cheapest joystick, but it does aim to be the most attractive option for open-source and DIY enthusiasts.

BOMs, parts lists, and documentation for various gimbals and 3D printed joysticks are sparse at best. I aim to include an extremely comprehensive requirements list, drop-in replacement part list, etc... so that this will be as accessible to everyone who has…

Libre-MiG trigger bill of materials (BOM)

5 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CONN_01X03
Conn_01x03
J18
2
SW_Push
SW2, SW3
2
10K
10k
R3, R4

Libre-MiG trigger design files

The KiCad project lives in the JustEnoughDucks/LibreMiG-S repository on GitHub; these links point at the commit this page was built from.

Libre-MiG trigger: common questions

How big is the Libre-MiG trigger PCB?

The Libre-MiG trigger measures 18 × 35 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Libre-MiG trigger?

5 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Libre-MiG trigger design files?

From the JustEnoughDucks/LibreMiG-S repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Libre-MiG trigger design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which JustEnoughDucks chose for the repository.

More boards in LibreMiG-S