HardLabs

Libre-MiG USB

JustEnoughDucks·LibreMiG-S·Electronics/source/separate_pcbs/libre-MiG USB/libre-MiG USB.kicad_pcb

Libre-MiG USB PCB layout, top view — open source board by JustEnoughDucks
Simulate this board

About the Libre-MiG USB PCB

Libre-MiG USB is an open source PCB design by JustEnoughDucks, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 20 × 20 mm, with 9 components from 7 distinct parts.

By type, the board carries 3 diodes, 2 connectors, 2 inductors and 2 capacitors.

From the project

Open Source Joystick/Open Source Flightstick that combines the Olukelu Gimbal with a MiG-31 inspired Flightstick designed for Star Citizen or space simulators

I saw few options for open-source flight sticks out there. Commercial options are exceedingly expensive. I strive to build a full-featured and high-quality Flightstick with a target BOM cost from 150-200€. It is not meant to be the cheapest joystick, but it does aim to be the most attractive option for open-source and DIY enthusiasts.

BOMs, parts lists, and documentation for various gimbals and 3D printed joysticks are sparse at best. I aim to include an extremely comprehensive requirements list, drop-in replacement part list, etc... so that this will be as accessible to everyone who has…

Libre-MiG USB bill of materials (BOM)

9 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CONN_01X05
Conn_01x05
J5
1
USB_C_Plug_USB2.0
P1
2
ESD9B5.0ST5G
ESD9B3.3ST5G
D1, D2
1
ESD9B5.0ST5G
D3
2
BLM18BA470SZ1D
FB1, FB2
1
100NF
100nF
C10
1
10NF
10nF
C11

Libre-MiG USB design files

The KiCad project lives in the JustEnoughDucks/LibreMiG-S repository on GitHub; these links point at the commit this page was built from.

Libre-MiG USB: common questions

How big is the Libre-MiG USB PCB?

The Libre-MiG USB measures 20 × 20 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Libre-MiG USB?

9 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Libre-MiG USB design files?

From the JustEnoughDucks/LibreMiG-S repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Libre-MiG USB design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which JustEnoughDucks chose for the repository.

More boards in LibreMiG-S