Rs torch
Juvenile-Furry·eleken-pcb·rs_torch/rs_torch.kicad_pcb
About the Rs torch PCB
Rs torch is an open source PCB design by Juvenile-Furry, published on GitHub. It is a 2-layer board measuring 50 × 50 mm, with 21 components from 14 distinct parts.
By type, the board carries 8 connectors, 5 resistors, 4 diodes, 2 transistors and 2 test points.
From the project
プリント基板用
Rs torch bill of materials (BOM)
21 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 2N7000 | TO-92_Inline | Q1, Q2 |
| 1 | INPUT_SOC | PinSocket_1x03_P2.54mm_Horizontal | J1 |
| 1 | INPUT_PIN | PinHeader_1x03_P2.54mm_Horizontal | J2 |
| 1 | OUTPUT_PIN | PinHeader_1x03_P2.54mm_Horizontal | J3 |
| 1 | OUTPUT_SOC | PinSocket_1x03_P2.54mm_Horizontal | J4 |
| 1 | INPUT2_PIN | PinHeader_1x03_P2.54mm_Horizontal | J5 |
| 1 | INPUT2_SOC | PinSocket_1x03_P2.54mm_Horizontal | J6 |
| 1 | INPUT3_SOC | PinSocket_1x03_P2.54mm_Horizontal | J7 |
| 1 | INPUT3_PIN | PinHeader_1x03_P2.54mm_Horizontal | J8 |
| 1 | LED_A | TestPoint_THTPad_D2.5mm_Drill1.2mm | TP1 |
| 1 | LED_K | TestPoint_THTPad_D2.5mm_Drill1.2mm | TP2 |
| 4 | 11EQS06 | D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4 |
| 3 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3 |
| 2 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R5 |
Rs torch design files
The KiCad project lives in the Juvenile-Furry/eleken-pcb repository on GitHub; these links point at the commit this page was built from.
- Layoutrs_torch/rs_torch.kicad_pcb
- Schematicrs_torch/rs_torch.kicad_sch
Rs torch: common questions
How big is the Rs torch PCB?
The Rs torch measures 50 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Rs torch?
21 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Rs torch design files?
From the Juvenile-Furry/eleken-pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Rs torch design in my own project?
The repository has no license, so all rights stay with Juvenile-Furry. Use it as a reference, and ask the author before reusing the design.
More boards in eleken-pcb
RISC-V
Rs note
Juvenile-Furry
50 × 50 mm15 parts2LNo license2RISC-V
Rs repeater
Juvenile-Furry
50 × 17 mm12 parts2LNo license2Rs lever
Juvenile-Furry
47 × 44 mm9 parts2LNo license2Rs dust 4way
Juvenile-Furry
50 × 50 mm8 parts2LNo license2Rs light sensor
Juvenile-Furry
50 × 24 mm8 parts2LNo license2Rs lamp
Juvenile-Furry
47 × 24 mm6 parts2LNo license2Rs dust 2way
Juvenile-Furry
50 × 18 mm4 parts2LNo license2