Rs note

Juvenile-Furry·eleken-pcb·rs_note/rs_note.kicad_pcb

Rs note PCB layout, top view — open source RISC-V board by Juvenile-Furry

About the Rs note PCB

Rs note is an open source RISC-V PCB design by Juvenile-Furry, published on GitHub. It is a 2-layer board measuring 50 × 50 mm, with 15 components from 15 distinct parts.

Its main chip is the CH32V002AxMx, from the RISC-V family. By type, the board carries 9 connectors, 1 IC, 1 crystal, 1 speaker, 1 switch and 1 capacitor.

From the project

プリント基板用

Main components on the Rs note

CH32V002AxMx

Rs note bill of materials (BOM)

15 components, 15 distinct parts.

QtyPartRefs
1
CH32V002AxMx
U1
1
20MHz
Y1
1
PIN_1
J1
1
SOC_1
J2
1
PIN_2
J3
1
SOC_2
J4
1
PIN_3
J5
1
SOC_3
J6
1
PIN_4
J7
1
SOC_4
J8
1
write
J9
1
PKM13EPYH4000-A0
LS1
1
SW_Push
SW1
1
100n
C1
1
1k
R1

Rs note design files

The KiCad project lives in the Juvenile-Furry/eleken-pcb repository on GitHub; these links point at the commit this page was built from.

Rs note: common questions

What microcontroller does the Rs note use?

The Rs note is built around the CH32V002AxMx, from the RISC-V family.

How big is the Rs note PCB?

The Rs note measures 50 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Rs note?

15 components, from 15 distinct parts. The full bill of materials is listed on this page.

Where can I download the Rs note design files?

From the Juvenile-Furry/eleken-pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Rs note design in my own project?

The repository has no license, so all rights stay with Juvenile-Furry. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Rs note without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.

More boards in eleken-pcb

Similar boards