Oneiro beacon

JuzzyDee·oneiro-beacon·hardware/FirebeetleCarrier.kicad_pcb

Oneiro beacon PCB layout, top view — open source board by JuzzyDee

About the Oneiro beacon PCB

Oneiro beacon is an open source PCB design by JuzzyDee, published on GitHub under the MIT license. It is a 2-layer board measuring 94 × 45 mm, with 36 components from 21 distinct parts.

By type, the board carries 12 resistors, 11 capacitors, 6 connectors, 3 transistors, 3 diodes and 1 inductor.

It belongs with the displays & leds, power & battery and dev boards & breakouts designs in this gallery.

From the project

A memory, made physical — an open e-paper display for the Oneiro memory system. No-solder build, KiCad hardware, bring-your-own backend.

The Beacon is a battery e-paper desk device that wakes once a day, fetches a single image from a backend you control, paints it onto the glass, and goes back to sleep. E-paper is bistable, so the image holds at zero power between refreshes — it just sits there, a picture on your desk that quietly changes once a day.

It was built as the display end of Oneiro, a memory system for an AI: each day it surfaces one memory as a dithered illustration. But the Beacon itself doesn't care where the image comes from. The device is the easy part — the memory feed is yours to bring.

Oneiro beacon bill of materials (BOM)

36 components, 21 distinct parts.

QtyPartRefs
1
AO3400A
Q1
1
SI2301CDS-T1-E3
Q2
1
Q_NPN
Q3
1
Conn_01x24_Pin
J1
1
Conn_01x18
J2
1
Conn_01x14
J3
1
Conn_01x04
J4
1
Conn_REFRESH
J5
1
Conn_CONFIG
J6
3
MBR0530
D1, D2, D3
1
10uH
L1
7
4.7uF/25V
C1, C3, C5, C6, C7, C8, C9
3
1uF/50V
C2, C4, C10
1
100nF/50V
C11
1
2.2Ω
R1
1
1MΩ
R2
1
NC/47K
R3
1
10K
R4
1
100K
R5
1
47K
R6
Show 1 more
QtyPartRefs
6
470Ω
R7, R8, R9, R10, R11, R12

Oneiro beacon design files

The KiCad project lives in the JuzzyDee/oneiro-beacon repository on GitHub; these links point at the commit this page was built from.

Oneiro beacon: common questions

How big is the Oneiro beacon PCB?

The Oneiro beacon measures 94 × 45 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Oneiro beacon?

36 components, from 21 distinct parts. The full bill of materials is listed on this page.

Where can I download the Oneiro beacon design files?

From the JuzzyDee/oneiro-beacon repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Oneiro beacon design in my own project?

Yes, under the terms of its MIT license, which JuzzyDee chose for the repository.

Similar boards