23 open source boards using the SAM-M10Q-00B

Real designs built with the SAM-M10Q-00B, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

23 boardsClear filters|Most starred

How designs wire the SAM-M10Q-00B

Read from the KiCad layouts of 17 open source designs, one per repository: what each pin of the SAM-M10Q-00B connects to, and the resistors, capacitors and other passives placed on it.

  • The SAFEBOOT pin is left unconnected on 14 of 16 designs (a signal on 2).
  • The VCC pin has a decoupling capacitor on 10 of 16 designs, most often 100 nF (then 10 µF).
  • The EXTINT pin is left unconnected on 12 of 16 designs (a signal on 4).
  • The SDA pin is left unconnected on 11 of 16 designs (a signal on 5).
GNDpin 1, 4, 5, 6, 10, 11, 15, 16, 20Connected to: GND 97%
V_IOpin 2Connected to: 3.3V 82%
  • Decoupling capacitor on 53% · 100 nF (10), 1 µF (1), 4.7 µF (1)
V_BCKPpin 3Connected to: 3.3V 47% · not connected 18% · a signal 35%
  • Decoupling capacitor on 41% · 100 nF (9), 1 µF (1)
SAFEBOOTpin 8Connected to: Not connected 88%
SDApin 9Connected to: Not connected 69% · a signal 31%
SCLpin 12Connected to: Not connected 69% · a signal 31%
VCCpin 17Connected to: 3.3V 88%
  • Decoupling capacitor on 63% · 100 nF (8), 10 µF (3), 1 µF (1)
EXTINTpin 19Connected to: Not connected 75% · a signal 25%

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ARCH by Terrapin-Rocket-Team, LIA by JGAguado, SAM-M10Q PONSv6 GNSS module by MasaoC and Flight module by FluYVy.

The SAM-M10Q-00B in open source designs

The gallery holds 23 open source boards using the SAM-M10Q-00B from 17 GitHub repositories; a typical one measures about 58.4 × 54 mm and carries around 59 components.

61% use four copper layers or more, and 35% carry an open source license.

The most starred is Main Board by Terrapin-Rocket-Team.

Microcontrollers on boards using the SAM-M10Q-00B

SAM-M10Q-00B: common questions

Where can I find a SAM-M10Q-00B reference design?

Each of the 23 boards on this page is a real design using the SAM-M10Q-00B. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the SAM-M10Q-00B SAFEBOOT pin connected?

The SAFEBOOT pin is left unconnected on 14 of 16 designs (a signal on 2). Counted from the KiCad layouts of 17 open source designs using the SAM-M10Q-00B.

What decoupling capacitors do designs use on the SAM-M10Q-00B VCC pin?

The VCC pin has a decoupling capacitor on 10 of 16 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 17 open source designs using the SAM-M10Q-00B.

How is the SAM-M10Q-00B EXTINT pin connected?

The EXTINT pin is left unconnected on 12 of 16 designs (a signal on 4). Counted from the KiCad layouts of 17 open source designs using the SAM-M10Q-00B.

What parts are used alongside the SAM-M10Q-00B?

The BQ25185DLHR, MMC5983MA, BMP390, C2765186 and DW01A appear in the most repositories here.

Which microcontrollers do boards using the SAM-M10Q-00B use?

Most are built on STM32 (7), NXP (2), Microchip SAM (2) and ESP32 (1).

How big is a typical board using the SAM-M10Q-00B?

The median is 58.4 × 54 mm, and 39% are two-layer designs.

What is the most popular open source board using the SAM-M10Q-00B?

By GitHub stars, Main Board by Terrapin-Rocket-Team, with 17 stars.

Can I simulate one of these boards using the SAM-M10Q-00B before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part