HardLabs

ROCKSAT Modules V1

K-Eckert15·RockSAT·Main Board_Muon/ROCKSAT_Modules_V1.kicad_pcb

ROCKSAT Modules V1 PCB layout, top view — open source AVR/Arduino board by K-Eckert15

About the ROCKSAT Modules V1 PCB

ROCKSAT Modules V1 is an open source AVR/Arduino PCB design by K-Eckert15, published on GitHub. It is a 2-layer board measuring 76.2 × 76.2 mm, with 20 components from 17 distinct parts.

Its main chip is the Arduino_MKR_Zero, from the AVR/Arduino family. Other key parts include the MC7805 and Opamp_Dual. By type, the board carries 8 resistors, 5 capacitors, 3 ICs, 2 connectors and 2 diodes.

From the project

RockSAT Circuits and Files

Main components on the ROCKSAT Modules V1

MC7805Opamp_DualArduino_MKR_Zero

ROCKSAT Modules V1 bill of materials (BOM)

20 components, 17 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MC7805
U1
1
Opamp_Dual
U2
1
Arduino_MKR_Zero
U4
1
Pins 1-10
J1
1
Pins 11-20
J2
2
D_Schottky
D1, D2
1
10U
10u
C1
1
100N
100n
C2
1
20N
20n
C3
1
0
C4
1
10P
10p
C5
1
1k
R7
2
10K
10k
R8, R9
1
249
R10
2
100K
100k
R11, R14
1
24.9K
24.9k
R12
1
0
R13

ROCKSAT Modules V1 design files

The KiCad project lives in the K-Eckert15/RockSAT repository on GitHub; these links point at the commit this page was built from.

ROCKSAT Modules V1: common questions

What microcontroller does the ROCKSAT Modules V1 use?

The ROCKSAT Modules V1 is built around the Arduino_MKR_Zero, from the AVR/Arduino family.

How big is the ROCKSAT Modules V1 PCB?

The ROCKSAT Modules V1 measures 76.2 × 76.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ROCKSAT Modules V1?

20 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ROCKSAT Modules V1 design files?

From the K-Eckert15/RockSAT repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ROCKSAT Modules V1 design in my own project?

The repository has no license, so all rights stay with K-Eckert15. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ROCKSAT Modules V1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in RockSAT

Similar boards