Someda claude plugin
kabidey·someda-claude-plugin·examples/sompi-v3s/evidence/kicad/circuit.kicad_pcb
About the Someda claude plugin PCB
Someda claude plugin is an open source PCB design by kabidey, published on GitHub under the MIT license. It is a 6-layer board measuring 90 × 60 mm, with 128 components from 54 distinct parts.
Other key parts include the Allwinner V3s, TPS562200DDCR, ME6211C18M5G, XC6206P302MR and W25Q128JVSIQ. By type, the board carries 59 capacitors, 43 resistors, 8 connectors, 7 ICs, 3 inductors and 2 crystals.
From the project
Unedited outputs of one someda ai build run of ../plan.json, kept here so the result in the README can be checked rather than believed. Nothing in this directory was hand-edited after the build. This is the 0.7.0 build: every differential pair routed as a coupled pair with its me
Unedited outputs of one someda ai build run of ../plan.json, kept here so the result in the README can be checked rather than believed. Nothing in this directory was hand-edited after the build. This is the 0.7.0 build: every differential pair routed as a coupled pair with its measured intra-pair skew, 3W/5W crosstalk spacing enforced by the router and re-measured by the audit, and the oscillation checks (termination, decoupling loops, regulators, crystals, PDN) in the stage table.
Main components on the Someda claude plugin
Someda claude plugin bill of materials (BOM)
128 components, 54 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Allwinner V3s | eLQFP-128_14x14mm_P0.4mm_EP5.72x5.72mm_ThermalVias | U1 |
| 2 | TPS562200DDCR TPS562200 | SOT-23-6 | U2, U3 |
| 1 | ME6211C18M5G | SOT-23-5 | U4 |
| 1 | XC6206P302MR | SOT-23 | U5 |
| 1 | W25Q128JVSIQ | SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U8 |
| 1 | AO3400A | SOT-23 | Q1 |
| 1 | 24MHZ 24MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 32.768KHZ 32.768kHz | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | TYPE-C-31-M-12 USB-C 16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | HR911105A RJ45 HR911105A | RJ45_Hanrun_HR911105A_Horizontal | J2 |
| 1 | microSD | microSD_HC_Hirose_DM3AT-SF-PEJM5 | J3 |
| 1 | LCD 40P RGB | Hirose_FH12-40S-0.5SH_1x40-1MP_P0.50mm_Horizontal | J4 |
| 1 | CAM MIPI 24P | Hirose_FH12-24S-0.5SH_1x24-1MP_P0.50mm_Horizontal | J5 |
| 1 | SJ-3523-SMT 3.5mm jack | Jack_3.5mm_CUI_SJ-3523-SMT_Horizontal | J6 |
| 1 | GPIO 2x13 | PinHeader_2x13_P2.54mm_Vertical | J7 |
| 1 | UART0 debug | PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | 2A fuse | Fuse_1206_3216Metric | F1 |
| 1 | RESET | SW_SPST_PTS645Sx43SMTR92 | SW1 |
| 1 | KEY1 | SW_SPST_PTS645Sx43SMTR92 | SW2 |
Show 34 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PWR red | LED_0603_1608Metric | D1 |
| 1 | STAT green | LED_0603_1608Metric | D2 |
| 2 | NR4018T4R7M 4.7uH 3A | L_Taiyo-Yuden_NR-40xx | L1, L2 |
| 1 | 10UH 10uH | L_0805_2012Metric | L3 |
| 34 | 100NF 100nF | C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C7, C9 +26 |
| 8 | 10UF 10uF | C_0603_1608Metric | C8, C15, C23, C26, C27, C28, C33, C50 |
| 2 | 1UF 1uF | C_0402_1005Metric | C32, C38 |
| 2 | 18PF 18pF | C_0402_1005Metric | C34, C35 |
| 2 | 6PF 6pF | C_0402_1005Metric | C36, C37 |
| 1 | 1NF 1nF | C_0402_1005Metric | C39 |
| 3 | 10UF 10uF | C_0805_2012Metric | C40, C42, C46 |
| 4 | 22UF 22uF | C_0805_2012Metric | C43, C44, C47, C48 |
| 3 | 1UF 1uF | C_0603_1608Metric | C49, C51, C52 |
| 4 | 2k 1% | R_0402_1005Metric | R1, R2, R3, R4 |
| 1 | 240R 1% | R_0402_1005Metric | R5 |
| 1 | 200k 1% | R_0402_1005Metric | R6 |
| 1 | 0R | R_0603_1608Metric | R7 |
| 1 | 6.04k 1% | R_0402_1005Metric | R8 |
| 1 | 10M | R_0402_1005Metric | R9 |
| 1 | 47K 47k | R_0402_1005Metric | R10 |
| 1 | 100k 1% | R_0402_1005Metric | R11 |
| 1 | 6.8k 1% | R_0402_1005Metric | R12 |
| 3 | 1k | R_0402_1005Metric | R13, R14, R35 |
| 2 | 5.1K 5.1k | R_0402_1005Metric | R15, R16 |
| 1 | 33.2k 1% | R_0402_1005Metric | R17 |
| 2 | 10k 1% | R_0402_1005Metric | R18, R20 |
| 1 | 5.62k 1% | R_0402_1005Metric | R19 |
| 4 | 51R 1% | R_0402_1005Metric | R21, R22, R23, R24 |
| 2 | 330R | R_0402_1005Metric | R25, R26 |
| 7 | 10K 10k | R_0402_1005Metric | R27, R28, R29, R30, R31, R33, R36 |
| 3 | 33R | R_0402_1005Metric | R32, R34, R37 |
| 4 | 4.7K 4.7k | R_0402_1005Metric | R38, R39, R42, R43 |
| 1 | 22R | R_0402_1005Metric | R40 |
| 1 | 0R | R_0402_1005Metric | R41 |
Someda claude plugin design files
The KiCad project lives in the kabidey/someda-claude-plugin repository on GitHub; these links point at the commit this page was built from.
Someda claude plugin: common questions
How big is the Someda claude plugin PCB?
The Someda claude plugin measures 90 × 60 mm, has 6 copper layers and is 1.6 mm thick.
How many components are on the Someda claude plugin?
128 components, from 54 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Someda claude plugin design files?
From the kabidey/someda-claude-plugin repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Someda claude plugin design in my own project?
Yes, under the terms of its MIT license, which kabidey chose for the repository.