7 open source boards using the XC6206P302MR
Real designs built with the XC6206P302MR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
M5Pi-F1C100S/200S
imliubo
47.5 × 50 mm141 parts4LNo license197Ecad viewer
Huaqiu-Electronics
47.5 × 50 mm141 parts4LMIT91FPGA
Sitina 1 Sensor Board
CameraNexus
71.5 × 63.6 mm415 parts6LMIT73Hw openmower sabo
xtech
254 × 115 mm322 parts6LCC-BY-NC-4.05FPGA
Sitina 1 Sensor Board
novvoo
71.5 × 63.6 mm415 parts6LMIT2Someda claude plugin
kabidey
90 × 60 mm128 parts6LMIT0RISC-V
Cardradio unrouted
tend876
83.2 × 51.6 mm42 parts2LNo license0
How designs wire the XC6206P302MR
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the XC6206P302MR connects to, and the resistors, capacitors and other passives placed on it.
- The VO pin has a decoupling capacitor on 7 of 7 designs, most often 1 µF (then 100 nF).
- The VI pin has a decoupling capacitor on 7 of 7 designs, most often 1 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| VOpin 2 | Connected to: 3V 100% |
|
| VIpin 3 | Connected to: 3.3V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include M5Pi-F1C100S/200S by imliubo, Ecad viewer by Huaqiu-Electronics, Sitina 1 Sensor Board by CameraNexus and Hw openmower sabo by xtech.
The XC6206P302MR in open source designs
The gallery holds 7 open source boards using the XC6206P302MR from 7 GitHub repositories; a typical one measures about 71.5 × 60 mm and carries around 141 components.
86% use four copper layers or more, and 57% carry an open source license.
The most starred is M5Pi-F1C100S/200S by imliubo.
Parts used alongside the XC6206P302MR
What boards using the XC6206P302MR are built for
XC6206P302MR: common questions
Where can I find a XC6206P302MR reference design?
Each of the 7 boards on this page is a real design using the XC6206P302MR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the XC6206P302MR VO pin?
The VO pin has a decoupling capacitor on 7 of 7 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 7 open source designs using the XC6206P302MR.
What decoupling capacitors do designs use on the XC6206P302MR VI pin?
The VI pin has a decoupling capacitor on 7 of 7 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 7 open source designs using the XC6206P302MR.
What parts are used alongside the XC6206P302MR?
The 74HC2G17GW, AD9990, ADA4800, CH340E and DG412DQ appear in the most repositories here.
Which microcontrollers do boards using the XC6206P302MR use?
Most are built on FPGA (2) and RISC-V (1).
How big is a typical board using the XC6206P302MR?
The median is 71.5 × 60 mm, and 14% are two-layer designs.
What is the most popular open source board using the XC6206P302MR?
By GitHub stars, M5Pi-F1C100S/200S by imliubo, with 197 stars.
Can I simulate one of these boards using the XC6206P302MR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.