FineMotion AUX
About the FineMotion AUX PCB
FineMotion AUX is an open source PCB design by Kamilake, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 48.8 × 19.4 mm, with 12 components from 8 distinct parts.
Other key parts include the ME6211C and MPU-9250. By type, the board carries 6 capacitors, 2 ICs, 2 connectors and 2 resistors.
From the project
ESP8266 Motion Capture Full-Body Tracker for SlimeVR
Due to JLCPCB's new assembly policy, soldering on the bottom side or using a non-black PCB will incur additional charges. Bottom side soldering is not possible if the "Economic" assembly option is selected. As the bottom side soldering is only for the connector, manual assembly is recommended. But.. if you ordering more than 31 boards, it is more economical to choose the Standard assembly option with panelization. If you have any further questions, please feel free to contact me!(Issues, mail, Discord, etc.)
Main components on the FineMotion AUX
FineMotion AUX bill of materials (BOM)
12 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ME6211C | SOT-23-5 | U1 |
| 1 | MPU-9250 | InvenSense_QFN-24_3x3mm_P0.4mm | U9 |
| 1 | Conn_01x06_Male | PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | Conn_01x04_Female | JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J2 |
| 3 | 0.1uF | C_0402_1005Metric | C2, C7, C21 |
| 1 | 10uF | C_0402_1005Metric | C5 |
| 2 | 47uF | C_0805_2012Metric | C19, C20 |
| 2 | 2.2K | R_0402_1005Metric | R11, R12 |
FineMotion AUX design files
The KiCad project lives in the Kamilake/FineMotion-Tracker repository on GitHub; these links point at the commit this page was built from.
FineMotion AUX: common questions
How big is the FineMotion AUX PCB?
The FineMotion AUX measures 48.8 × 19.4 mm, has 2 copper layers and is 1.2 mm thick.
How many components are on the FineMotion AUX?
12 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the FineMotion AUX design files?
From the Kamilake/FineMotion-Tracker repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the FineMotion AUX design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which Kamilake chose for the repository.
