5 open source boards using the ME6211C

Real designs built with the ME6211C, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

The ME6211C in open source designs

The gallery holds 5 open source boards using the ME6211C from 4 GitHub repositories; a typical one measures about 65 × 100 mm and carries around 214 components.

60% use four copper layers or more, and 100% carry an open source license.

The most starred is Audcalc by jonbro.

Microcontrollers on boards using the ME6211C

What boards using the ME6211C are built for

ME6211C: common questions

Where can I find a ME6211C reference design?

Each of the 5 boards on this page is a real design using the ME6211C. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the ME6211C?

The HCPL-0631, LM4040DBZ-2.5, MCP73831T-2ATI/OT, RP2040 and TLV320AIC3204 appear in the most repositories here.

Which microcontrollers do boards using the ME6211C use?

Most are built on RP2040/RP2350 (3) and ESP8266 (1).

How big is a typical board using the ME6211C?

The median is 65 × 100 mm, and 40% are two-layer designs.

What is the most popular open source board using the ME6211C?

By GitHub stars, Audcalc by jonbro, with 59 stars.

Can I simulate one of these boards using the ME6211C before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part