Antenna array
About the Antenna array PCB
Antenna array is an open source PCB design by kamilix2003, published on GitHub under the MIT license. It is a 2-layer board measuring 214 × 100 mm, with 8 components from 5 distinct parts.
By type, the board carries 4 connectors and 4 antennas.
It belongs with the rf & radio and displays & leds designs in this gallery.
From the project
Interface for RF phase shifter as part of phased antenna array
STM32G0B01 based board for controlling daisy-chained digital phase shifter via SPI-like serial interface. User can interface with the board either by buttons and LEDs on the board or via virtual serial port over USB, communication over serial port is realized using simple TLV protocol. The board is providing bipolar supply for the phase shifters.
Available commands: | Type | Length [bytes] | Value | Description | |----------|--------------------|-----------------------|-------------| | 0x02 | 1 | command id | Ack | | 0x10 | 4 | phase shifts (0 - 15) | Set phase | | 0x11 | 0 | - | Transmit |…
Antenna array bill of materials (BOM)
8 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_ST_STDC14 ~ | Conn | J1 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P ~ | Conn | J2 |
| 1 | CONN_01X02_PIN ~ | Conn | J3 |
| 1 | CONN_01X03_PIN ~ | Conn | J4 |
| 4 | Antenna | patch | AE1, AE2, AE3, AE4 |
Antenna array design files
The KiCad project lives in the kamilix2003/Phase-Shifter repository on GitHub; these links point at the commit this page was built from.
Antenna array: common questions
How big is the Antenna array PCB?
The Antenna array measures 214 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Antenna array?
8 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Antenna array design files?
From the kamilix2003/Phase-Shifter repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Antenna array design in my own project?
Yes, under the terms of its MIT license, which kamilix2003 chose for the repository.
More boards in Phase-Shifter
Similar boards
View screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2k
LevelShifterBreakout
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
Display eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k