DT-1TB
About the DT-1TB PCB
DT-1TB is an open source PCB design by kanengomibako, published on GitHub under the Unlicense license. It is a 2-layer board measuring 54 × 47 mm, with 62 components from 38 distinct parts.
By type, the board carries 26 resistors, 20 capacitors, 6 diodes and 5 connectors.
DT-1TB bill of materials (BOM)
62 components, 38 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IN | my_WirePad_1mmDrill | J1 |
| 2 | GND | my_WirePad_1mmDrill | J2, J4 |
| 1 | OUT | my_WirePad_1mmDrill | J3 |
| 1 | VCC | my_WirePad_1mmDrill | J5 |
| 2 | NJM4558 | DIP-8_W7.62mm_Socket | N1, N2 |
| 1 | 250kB | my_pot_5mm | VR1 |
| 1 | 25kB | my_pot_5mm | VR2 |
| 1 | 100kB | my_pot_5mm | VR3 |
| 3 | 1N4148 | my_D_P5.08mm_Horizontal | D1, D2, D6 |
| 2 | 1N4148 | my_D_P7.62mm | D3, D4 |
| 1 | 1N4007 | my_D_P7.62mm | D7 |
| 3 | 47n | my_C_Rect1_P5.00mm | C1, C5, C8 |
| 1 | 4.7n | my_C_Rect1_P5.00mm | C2 |
| 2 | 330p | my_C_Disc_P2.50mm | C3, C14 |
| 2 | 100p | my_C_Disc_P2.50mm | C4, C7 |
| 2 | 1n | my_C_Rect1_P5.00mm | C6, C13 |
| 2 | 1u | my_C_D5.0mm_P2.50mm | C9, C12 |
| 1 | 15n | my_C_Rect1_P5.00mm | C10 |
| 3 | 100n | my_C_Rect1_P5.00mm | C11, C23, C25 |
| 1 | 2.2u | my_C_D5.0mm_P2.50mm | C15 |
Show 18 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 150p | my_C_Disc_P2.50mm | C24 |
| 1 | 100u | my_C_D5.0mm_P2.50mm | C27 |
| 1 | 10u | my_C_D5.0mm_P2.50mm | C28 |
| 1 | 4.7M | my_R_P7.62mm_Horizontal | R0 |
| 2 | 560R | my_R_P7.62mm_Horizontal | R1, R13 |
| 2 | 10k | my_R_P7.62mm_Horizontal | R2, R6 |
| 6 | 100k | my_R_P7.62mm_Horizontal | R3, R4, R7, R8, R19, R34 |
| 2 | 220k | my_R_P7.62mm_Horizontal | R5, R9 |
| 3 | 470k | my_R_P7.62mm_Horizontal | R10, R32, R33 |
| 1 | 1.5M | my_R_P7.62mm_Horizontal | R11 |
| 1 | 15k | my_R_P7.62mm_Horizontal | R12 |
| 1 | 3.9k | my_R_P7.62mm_Horizontal | R15 |
| 2 | 2.2k | my_R_P7.62mm_Horizontal | R16, R18 |
| 1 | 6.8k | my_R_P7.62mm_Horizontal | R17 |
| 1 | 1M | my_R_P7.62mm_Horizontal | R20 |
| 1 | 1k | my_R_P7.62mm_Horizontal | R21 |
| 1 | 47k | my_R_P7.62mm_Horizontal | R37 |
| 1 | 56k | my_R_P7.62mm_Horizontal | R38 |
DT-1TB design files
The KiCad project lives in the kanengomibako/EffectsPedals repository on GitHub; these links point at the commit this page was built from.
- LayoutDT1TB/DT-1TB.kicad_pcb
- SchematicDT1TB/DT-1TB.kicad_sch
DT-1TB: common questions
How big is the DT-1TB PCB?
The DT-1TB measures 54 × 47 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DT-1TB?
62 components, from 38 distinct parts. The full bill of materials is listed on this page.
Where can I download the DT-1TB design files?
From the kanengomibako/EffectsPedals repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the DT-1TB design in my own project?
Yes, under the terms of its Unlicense license, which kanengomibako chose for the repository.
More boards in EffectsPedals
STM32OwmBoard
55.4 × 66 mm158 parts2LUnlicense11
PedalMeetingHeadphoneAmp RevD
100 × 80 mm121 parts2LUnlicense11
BufferVariator RevB
100 × 100 mm100 parts2LUnlicense11
BDoperator
54 × 47 mm61 parts2LUnlicense11
E6Delay
54 × 47 mm60 parts2LUnlicense11
ReincarnationChorus RevB
54 × 47 mm58 parts2LUnlicense11
TremFreak
54 × 47 mm49 parts2LUnlicense11
ConsistentGuitarOutput RevA
94 × 59 mm38 parts2LUnlicense11
BootsUpBuffer
33 × 40 mm37 parts2LUnlicense11
OperationalFuzz
43 × 47 mm32 parts2LUnlicense11