ConsistentGuitarOutput RevA
About the ConsistentGuitarOutput RevA PCB
ConsistentGuitarOutput RevA is an open source PCB design by kanengomibako, published on GitHub under the Unlicense license. It is a 2-layer board measuring 94 × 59 mm, with 38 components from 19 distinct parts.
Other key parts include the NJM4580 and NJM4556A. By type, the board carries 18 resistors, 6 ICs, 5 capacitors, 3 connectors, 2 diodes and 2 inductors.
Main components on the ConsistentGuitarOutput RevA
ConsistentGuitarOutput RevA bill of materials (BOM)
38 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NJM4580 | my_DMP8 | U1 |
| 5 | NJM4556A | my_DMP8 | U2, U3, U4, U5, U6 |
| 1 | IN | PJ-6318 | J1 |
| 1 | OUT | PJ-6318 | J2 |
| 1 | DC9V_IN | my_DC_Jack | J3 |
| 1 | LPF | SW_Toggle_DPDT | SW1 |
| 1 | A100k | my_pot123 | VR1 |
| 1 | 1N4007 | my_D_SOD-123 | D1 |
| 1 | LED | my_LED_3mm | D2 |
| 1 | 150u | my_conn | L1 |
| 1 | Pickup | my_conn | L2 |
| 1 | 10u | my_C_D5.0mm_P2.50mm | C1 |
| 1 | 220n | my_C_Rect1_P5.00mm | C2 |
| 1 | 4700u | my_C_D5.0mm_P2.50mm | C3 |
| 2 | 220u | CP_Radial_D6.3mm_P2.50mm | C4, C5 |
| 2 | 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R4 |
| 5 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R16, R17, R18 |
| 10 | 10R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6, R7, R8, R9, R10, R11, R12 +2 |
| 1 | 4.7R | R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R15 |
ConsistentGuitarOutput RevA design files
The KiCad project lives in the kanengomibako/EffectsPedals repository on GitHub; these links point at the commit this page was built from.
ConsistentGuitarOutput RevA: common questions
How big is the ConsistentGuitarOutput RevA PCB?
The ConsistentGuitarOutput RevA measures 94 × 59 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ConsistentGuitarOutput RevA?
38 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the ConsistentGuitarOutput RevA design files?
From the kanengomibako/EffectsPedals repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ConsistentGuitarOutput RevA design in my own project?
Yes, under the terms of its Unlicense license, which kanengomibako chose for the repository.
More boards in EffectsPedals
STM32OwmBoard
55.4 × 66 mm158 parts2LUnlicense11
PedalMeetingHeadphoneAmp RevD
100 × 80 mm121 parts2LUnlicense11
BufferVariator RevB
100 × 100 mm100 parts2LUnlicense11
DT-1TB
54 × 47 mm62 parts2LUnlicense11
BDoperator
54 × 47 mm61 parts2LUnlicense11
E6Delay
54 × 47 mm60 parts2LUnlicense11
ReincarnationChorus RevB
54 × 47 mm58 parts2LUnlicense11
TremFreak
54 × 47 mm49 parts2LUnlicense11
BootsUpBuffer
33 × 40 mm37 parts2LUnlicense11
OperationalFuzz
43 × 47 mm32 parts2LUnlicense11