HardLabs

-VitalSync-IC-design using

Karanvaswani·-VitalSync-IC-design-using-kicad

-VitalSync-IC-design using PCB layout, top view — open source AVR/Arduino board by Karanvaswani

About the -VitalSync-IC-design using PCB

-VitalSync-IC-design using is an open source AVR/Arduino PCB design by Karanvaswani, published on GitHub. It is a 2-layer board measuring 184.5 × 93.5 mm, with 14 components from 7 distinct parts.

Its main chip is the Arduino_UNO, from the AVR/Arduino family. Other key parts include the SSD 1306 and MAX10302. By type, the board carries 4 resistors, 3 switches, 3 capacitors, 2 ICs, 1 module and 1 diode.

It belongs with the displays & leds designs in this gallery.

From the project

A hardware design project for a pulse oximeter (SpO2 monitor) built around the MAX30102 sensor, Arduino UNO, and SSD1306 OLED display. The schematic and PCB layout were designed using KiCad 9.0.

A hardware design project for a pulse oximeter (SpO2 monitor) built around the MAX30102 sensor, Arduino UNO, and SSD1306 OLED display. The schematic and PCB layout were designed using KiCad 9.0.

Both the MAX30102 and SSD1306 share the I²C bus (A4/A5 on Arduino UNO).

- KiCad 9.0 — to open and edit the schematic/PCB files - Arduino IDE — to program the microcontroller

Main components on the -VitalSync-IC-design using

SSD 1306MAX10302Arduino_UNO

-VitalSync-IC-design using bill of materials (BOM)

14 components, 7 distinct parts.

QtyPartRefs
1
SSD 1306
U1
1
MAX10302
U2
1
Arduino_UNO
A1
3
SW_Push
SW1, SW2, SW3
1
LED
D1
3
100n
C1, C2, C3
4
1K
R1, R2, R3, R4

-VitalSync-IC-design using design files

The KiCad project lives in the Karanvaswani/-VitalSync-IC-design-using-kicad repository on GitHub; these links point at the commit this page was built from.

-VitalSync-IC-design using: common questions

What microcontroller does the -VitalSync-IC-design using use?

The -VitalSync-IC-design using is built around the Arduino_UNO, from the AVR/Arduino family.

How big is the -VitalSync-IC-design using PCB?

The -VitalSync-IC-design using measures 184.5 × 93.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the -VitalSync-IC-design using?

14 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the -VitalSync-IC-design using design files?

From the Karanvaswani/-VitalSync-IC-design-using-kicad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the -VitalSync-IC-design using design in my own project?

The repository has no license, so all rights stay with Karanvaswani. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the -VitalSync-IC-design using without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards