ActiveSpice
Kasooka·ActiveSpice·ActiveSpiceExampleSCH/01_ActiveSpice_LogicGate_AOPideal_M00.kicad_sch
About the ActiveSpice PCB
ActiveSpice is an open source PCB design by Kasooka, published on GitHub under the GPL-3.0 license. It is a board, with 69 components from 29 distinct parts.
Other key parts include the Inverter, AND, NAND, OR and NOR. By type, the board carries 33 ICs, 16 resistors, 10 capacitors and 2 transistors.
From the project
ActiveSpice = Spice simulation made easy on Kicad/Ngspice. It's a library of symbols, Spice models, code, and tutos. It's open source under GPL. Commercial use allow. Keep the author credits and link to Activetronics.com
Main components on the ActiveSpice
ActiveSpice bill of materials (BOM)
69 components, 29 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 7 | Inverter | U1, U14, U15, U30, U31, U32, U33 | |
| 5 | AND | U2, U22, U23, U24, U25 | |
| 5 | NAND | U3, U8, U9, U26, U27 | |
| 3 | OR | U4, U20, U21 | |
| 3 | NOR | U5, U28, U29 | |
| 1 | XOR | U6 | |
| 1 | XNOR | U7 | |
| 4 | ${SIM.PARAMS} | U10, U11, U12, U13 | |
| 3 | RSFlipFlop | U16, U17, U18 | |
| 1 | Spice_BeaviorFct | U19 | |
| 1 | NMOS | Q1 | |
| 1 | PMOS | Q2 | |
| 2 | 5 | V1, V2 | |
| 4 | VPULSE | V3, V4, V7, V8 | |
| 1 | 1 | V5 | |
| 1 | VSIN | V6 | |
| 2 | 10f | C1, C8 | |
| 2 | 30f | C2, C6 | |
| 2 | 1n | C3, C4 | |
| 2 | 5f | C5, C7 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 15f | C9 | |
| 1 | 50f | C10 | |
| 4 | R | R1, R2, R3, R4 | |
| 6 | 1K | R5, R6, R7, R8, R11, R12 | |
| 2 | 100K | R9, R10 | |
| 1 | 40 | R13 | |
| 1 | 20 | R14 | |
| 1 | 10 | R15 | |
| 1 | 25 | R16 |
ActiveSpice design files
The KiCad project lives in the Kasooka/ActiveSpice repository on GitHub; these links point at the commit this page was built from.
ActiveSpice: common questions
How many components are on the ActiveSpice?
69 components, from 29 distinct parts. The full bill of materials is listed on this page.
Where can I download the ActiveSpice design files?
From the Kasooka/ActiveSpice repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the ActiveSpice design in my own project?
Yes, under the terms of its GPL-3.0 license, which Kasooka chose for the repository.