5 open source boards using the NAND
Real designs built with the NAND, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
- schematic only · 819 parts
IBM MCGA
schlae
819 partsNo license40 NXP
Horizon
Horizon-Avionics
68.8 × 90.3 mm168 parts4LNo license17ESP32
Calender
hardwarepro
94 × 27.5 mm44 parts2LNo license0- schematic only · 69 parts
ActiveSpice
Kasooka
69 partsGPL-3.00 Charging Shutdown Circuit
formulaslug
139.7 × 88.9 mm37 parts2LNo license2
The NAND in open source designs
The gallery holds 5 open source boards using the NAND from 5 GitHub repositories; a typical one measures about 94 × 88.9 mm and carries around 69 components.
67% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is IBM MCGA by schlae.
What boards using the NAND are built for
NAND: common questions
Where can I find a NAND reference design?
Each of the 5 boards on this page is a real design using the NAND. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the NAND use?
Most are built on ESP32 (1) and NXP (1).
How big is a typical board using the NAND?
The median is 94 × 88.9 mm, and 67% are two-layer designs.
What is the most popular open source board using the NAND?
By GitHub stars, IBM MCGA by schlae, with 40 stars.
Can I simulate one of these boards using the NAND before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.