3 open source boards using the XOR

Real designs built with the XOR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The XOR in open source designs

The gallery holds 3 open source boards using the XOR from 3 GitHub repositories; a typical one measures about 22 × 28.5 mm and carries around 69 components.

100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is IBM MCGA by schlae.

Parts used alongside the XOR

XOR: common questions

Where can I find a XOR reference design?

Each of the 3 boards on this page is a real design using the XOR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the XOR?

The AND, NAND and NOR appear in the most repositories here.

How big is a typical board using the XOR?

The median is 22 × 28.5 mm, and 100% are two-layer designs.

What is the most popular open source board using the XOR?

By GitHub stars, IBM MCGA by schlae, with 40 stars.

Can I simulate one of these boards using the XOR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part