Usb c-3v3-sensor breakout
Kautuk-Purohit·usb-c-3v3-sensor-breakout·kicad/usb_c_sensor_breakout/usb_c_sensor_breakout.kicad_pcb
About the Usb c-3v3-sensor breakout
Usb c-3v3-sensor breakout is an open source STM32 PCB design by Kautuk-Purohit, published on GitHub. It is a 2-layer board measuring 33 × 28.5 mm, with 22 components from 14 distinct parts.
Its main chip is the STM32G031K8Tx, from the STM32 family. Other key parts include the AP2112K-3.3 and IIM-42652. By type, the board carries 7 capacitors, 6 resistors, 4 connectors, 3 ICs, 1 fuse and 1 diode.
It belongs with the sensors and dev boards & breakouts designs in this gallery.
From the project
USB-C powered 3.3V sensor breakout PCB in KiCad featuring ESD/TVS protection, fuse, LDO regulation, I2C sensor, test points, and DFM-ready manufacturing outputs (Gerbers/BOM/PNP).
A fabrication ready PCB designed as a portfolio project. Includes a full schematic and PCB layout, verified with ERC (Electrical Rules Check) and DRC (Design Rules Check), and validated Gerbers and drills in Gerber Viewer.
schematic design → layout and routing → design rule checks → manufacturing outputs
The goal is to show practical board design skills (power, interfaces, layout, manufacturability)

Main components on the Usb c-3v3-sensor breakout
Usb c-3v3-sensor breakout bill of materials (BOM)
22 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP2112K-3.3 | SOT-23-5 | U1 |
| 1 | IIM-42652 | Bosch_LGA-14_3x2.5mm_P0.5mm | U2 |
| 1 | STM32G031K8Tx | LQFP-32_7x7mm_P0.8mm | U3 |
| 1 | USB_C_Receptacle_PowerOnly_6P | USB_C_Receptacle_HRO_TYPE-C-31-M-17 | J1 |
| 1 | J_UART | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | J_I2C_EXP | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | J_SWD | PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | Fuse | Fuse_1812_4532Metric | F1 |
| 1 | D_TVS | D_SOD-123 | D1 |
| 3 | 10u | C_0603_1608Metric | C1, C2, C6 |
| 4 | 0.1u | C_0603_1608Metric | C3, C4, C5, C7 |
| 2 | 5100 | R_0603_1608Metric | R1, R2 |
| 2 | 4.7k | R_0603_1608Metric | R3, R4 |
| 2 | 10k | R_0603_1608Metric | R5, R6 |
Usb c-3v3-sensor breakout design files
The KiCad project lives in the Kautuk-Purohit/usb-c-3v3-sensor-breakout repository on GitHub; these links point at the commit this page was built from.
Usb c-3v3-sensor breakout: common questions
What microcontroller does the Usb c-3v3-sensor breakout use?
The Usb c-3v3-sensor breakout is built around the STM32G031K8Tx, from the STM32 family.
How big is the Usb c-3v3-sensor breakout?
The Usb c-3v3-sensor breakout measures 33 × 28.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Usb c-3v3-sensor breakout?
22 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Usb c-3v3-sensor breakout design files?
From the Kautuk-Purohit/usb-c-3v3-sensor-breakout repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Usb c-3v3-sensor breakout design in my own project?
The repository has no license, so all rights stay with Kautuk-Purohit. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Usb c-3v3-sensor breakout without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k