9 open source boards using the IIM-42652

Real designs built with the IIM-42652, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the IIM-42652

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the IIM-42652 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDDIO pin has a decoupling capacitor on 8 of 8 designs, most often 100 nF (then 10 nF).
  • The VDD pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 2.2 µF).
  • The INT1/INT pin is left unconnected on 6 of 8 designs (a signal on 2).
  • The RESV pins is left unconnected on 67% of them (GND on 9).
AP_SDO/AP_AD0pin 1Connected to: GND 63% · a signal 25%
RESVpin 2, 3, 10, 11Connected to: Not connected 67% · GND 30%
INT1/INTpin 4Connected to: Not connected 75% · a signal 25%
VDDIOpin 5Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (9), 10 nF (4), 2.2 µF (4)
GNDpin 6, 7Connected to: GND 93%
VDDpin 8Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (8), 2.2 µF (4), 10 nF (4)
AP_SCL/AP_SCLKpin 13Connected to: A connector 71%, the microcontroller 43%, DRV8214RTER 29%
  • Pull-up to 3.3V on 43% · 4.7 kΩ (3)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Lesonar2 beamforming rx hardware by tornyol, ADCS subsystem by nanosatlab, ADCS subsystem by abelwu2001 and Capable jetson carrier by CapableRobot.

The IIM-42652 in open source designs

The gallery holds 9 open source boards using the IIM-42652 from 8 GitHub repositories; a typical one measures about 40 × 55 mm and carries around 126 components.

89% use four copper layers or more, and 56% carry an open source license.

The most starred is Lesonar2 beamforming rx hardware by tornyol.

Microcontrollers on boards using the IIM-42652

IIM-42652: common questions

Where can I find a IIM-42652 reference design?

Each of the 9 boards on this page is a real design using the IIM-42652. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the IIM-42652 VDDIO pin?

The VDDIO pin has a decoupling capacitor on 8 of 8 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 8 open source designs using the IIM-42652.

What decoupling capacitors do designs use on the IIM-42652 VDD pin?

The VDD pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 8 open source designs using the IIM-42652.

How is the IIM-42652 INT1/INT pin connected?

The INT1/INT pin is left unconnected on 6 of 8 designs (a signal on 2). Counted from the KiCad layouts of 8 open source designs using the IIM-42652.

What parts are used alongside the IIM-42652?

The 24AA64T-I/OT, BMI088, BMM150, BMP581 and DRV8214RTER appear in the most repositories here.

Which microcontrollers do boards using the IIM-42652 use?

Most are built on ESP32 (3), STM32 (3), RP2040/RP2350 (2) and FPGA (1).

How big is a typical board using the IIM-42652?

The median is 40 × 55 mm, and 11% are two-layer designs.

What is the most popular open source board using the IIM-42652?

By GitHub stars, Lesonar2 beamforming rx hardware by tornyol, with 112 stars.

Can I simulate one of these boards using the IIM-42652 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part