Sz jikken
kbcola·sz-jikken·circuit/main.kicad_pcb
About the Sz jikken PCB
Sz jikken is an open source PIC PCB design by kbcola, published on GitHub. It is a 2-layer board measuring 77.5 × 38.1 mm, with 24 components from 11 distinct parts.
Its main chip is the PIC16F1778-I/SP, from the PIC family. By type, the board carries 7 resistors, 4 diodes, 4 capacitors, 2 modules, 2 transistors and 2 connectors.
Main components on the Sz jikken
Sz jikken bill of materials (BOM)
24 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PIC16F1778-I/SP PIC16F1778-I_SP | DIP-28_W7.62mm_LongPads | IC1 |
| 2 | Motor_DC | PinHeader_1x02_P2.54mm_Horizontal | M1, M2 |
| 2 | MP4212(Q) MP4212_Q_ | MP4212Q | Q1, Q2 |
| 2 | Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J1, J2 |
| 1 | Battery | PinHeader_1x02_P2.54mm_Horizontal | BT1 |
| 1 | SW_SPDT | ToggleSW_3pin | SW1 |
| 4 | LED | LED_D3.0mm | D1, D2, D3, D4 |
| 3 | C_Polarized | CP_Radial_D5.0mm_P2.00mm | C1, C2, C3 |
| 1 | C | C_Disc_D5.0mm_W2.5mm_P5.00mm | C4 |
| 5 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R4, R5, R6, R7 |
| 2 | R | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R2, R3 |
Sz jikken design files
The KiCad project lives in the kbcola/sz-jikken repository on GitHub; these links point at the commit this page was built from.
- Layoutcircuit/main.kicad_pcb
- Schematiccircuit/main.kicad_sch
Sz jikken: common questions
What microcontroller does the Sz jikken use?
The Sz jikken is built around the PIC16F1778-I/SP, from the PIC family.
How big is the Sz jikken PCB?
The Sz jikken measures 77.5 × 38.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sz jikken?
24 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sz jikken design files?
From the kbcola/sz-jikken repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Sz jikken design in my own project?
The repository has no license, so all rights stay with kbcola. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Sz jikken without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
Similar boards
PIC
Pslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7kPIC
Lens
ervanalb
80 × 80 mm53 parts4LNo license515PIC
Micro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414PIC
GB-CARTPP-DIY
Gekkio
100 × 100 mm22 parts2LCC-BY-4.0379PIC
GB-LIVE32
Gekkio
51.4 × 61 mm46 parts4LCC-BY-4.0379PIC
GB-CART256K-A
Gekkio
51.4 × 61 mm17 parts2LCC-BY-4.0379