USB-TTL-TWRPlus
kc1awv·USB-TTL-TWRPlus·hardware/0.1a/usbttl.kicad_pcb
About the USB-TTL-TWRPlus PCB
USB-TTL-TWRPlus is an open source PCB design by kc1awv, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 36.8 × 38.6 mm, with 19 components from 12 distinct parts.
Other key parts include the CH340G, USBLC6-2SC6 and AMS1117-3.3. By type, the board carries 7 connectors, 4 capacitors, 3 ICs, 2 diodes, 2 resistors and 1 crystal.
From the project
USB dongle for programming a LilyGo T-TWR Plus Open Edition
Main components on the USB-TTL-TWRPlus
USB-TTL-TWRPlus bill of materials (BOM)
19 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH340G | SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | USBLC6-2SC6 | SOT-666 | U2 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | 12MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB_C_Receptacle | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 3 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J2, J3, J4 |
| 2 | Conn_01x01_Pin | PinHeader_1x01_P2.54mm_Vertical | J5, J6 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J7 |
| 2 | LL4148 | D_MiniMELF | D1, D2 |
| 2 | 33p | C_0603_1608Metric | C1, C2 |
| 2 | 0.1u | C_0603_1608Metric | C3, C4 |
| 2 | 5k1 | R_0603_1608Metric | R1, R2 |
USB-TTL-TWRPlus design files
The KiCad project lives in the kc1awv/USB-TTL-TWRPlus repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/0.1a/usbttl.kicad_pcb
- Schematichardware/0.1a/usbttl.kicad_sch
USB-TTL-TWRPlus: common questions
How big is the USB-TTL-TWRPlus PCB?
The USB-TTL-TWRPlus measures 36.8 × 38.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the USB-TTL-TWRPlus?
19 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the USB-TTL-TWRPlus design files?
From the kc1awv/USB-TTL-TWRPlus repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the USB-TTL-TWRPlus design in my own project?
Yes, under the terms of its GPL-3.0 license, which kc1awv chose for the repository.