Mg90DSmartController
keionbis·ServoControllerRev2·motor controller Mini(SPI)/mg90DSmartController/mg90DSmartController.kicad_pcb
About the Mg90DSmartController PCB
Mg90DSmartController is an open source STM32 PCB design by keionbis, published on GitHub. It is a 2-layer board measuring 20.5 × 10.5 mm, with 3 components from 2 distinct parts.
Its main chip is the STM32L432KCUX, from the STM32 family. By type, the board carries 2 connectors and 1 IC.
Main components on the Mg90DSmartController
Mg90DSmartController bill of materials (BOM)
3 components, 2 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32L432KCUX STM32L011F4Ux | UQFN-20-1EP_3x3mm_P0.4mm_EP1.85x1.85mm | U1 |
| 2 | CONN_01X06_MALE Conn_01x04_Male | Molex_CLIK-Mate_502382-0470_1x04-1MP_P1.25mm_Vertical | J1, J2 |
Mg90DSmartController design files
The KiCad project lives in the keionbis/ServoControllerRev2 repository on GitHub; these links point at the commit this page was built from.
Mg90DSmartController: common questions
What microcontroller does the Mg90DSmartController use?
The Mg90DSmartController is built around the STM32L432KCUX, from the STM32 family.
How big is the Mg90DSmartController PCB?
The Mg90DSmartController measures 20.5 × 10.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mg90DSmartController?
3 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Mg90DSmartController design files?
From the keionbis/ServoControllerRev2 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Mg90DSmartController design in my own project?
The repository has no license, so all rights stay with keionbis. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Mg90DSmartController without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in ServoControllerRev2
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k