17 open source boards using the STM32L432KCUx
Real designs built with the STM32L432KCUx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Sharp ce140f emul
ffxx68
64.4 × 42.2 mm46 parts2LNo license21STM32
AnalogWatch
sulkith
31 × 31 mm70 parts2LMIT2STM32
Custom eval stm32L43KCU6
hedfd434
27.4 × 53 mm35 parts4LNo license2STM32
Hephaestus
TheColonelYoung
68 × 25 mm90 parts2LGPL-3.01STM32
SmallKat Jumbo Motherboard
keionbis
80 × 80 mm49 parts2LNo license1STM32
ControlPanelV3S
bartkepl
120 × 75 mm300 parts4LMIT0STM32
Spha btni hardware
sillevl
103 × 86.5 mm112 parts2LNo license0STM32
Spha rel12-hardware
sillevl
207.5 × 86.5 mm89 parts2LNo license0STM32
Spha rel6-hardware
sillevl
103 × 86.5 mm70 parts2LNo license0STM32
Spha btnn hardware
sillevl
37.6 × 37.6 mm68 parts4LNo license0STM32
9-axis-IMU-barometer-Data logger-
Dhruv2212-star
44 × 72 mm59 parts2LNo license0STM32
Spha btnu hardware
sillevl
29 × 29 mm47 parts4LNo license0- schematic only · 20 partsSTM32
AESH2026
iamanimeshshukl
20 partsNo license0 STM32
Rev3
keionbis
38 × 18 mm29 parts2LNo license1STM32
Motor controller
keionbis
38 × 18 mm24 parts4LNo license1STM32
Mg90DSmartController
keionbis
20.5 × 10.5 mm3 parts2LNo license1STM32
Panelized pompe sap
ENACRobotique
93 × 146 mm18 parts2LNo license2
How designs wire the STM32L432KCUx
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the STM32L432KCUx connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pins have a decoupling capacitor on 11 of 13 designs, most often 100 nF (then 1 µF).
- The VDDA pin has a decoupling capacitor on 11 of 13 designs, most often 100 nF (then 1 µF).
- The PH3 pin has a resistor to GND on 11 of 13 designs, most often 10 kΩ (then 100 kΩ).
- The PA15 pin is left unconnected on 10 of 13 designs (a signal on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1, 17 | Connected to: 3.3V 92% |
|
| PC14pin 2 | Connected to: Signal 77% · not connected 23% |
|
| PC15pin 3 | Connected to: Signal 77% · not connected 23% |
|
| VDDApin 5 | Connected to: 3.3V 85% · a signal 15% |
|
| PA1pin 7 | Connected to: Not connected 69% · a signal 31% | — |
| PA5pin 11 | Connected to: A connector 23% · not connected 38% |
|
| PA6pin 12 | Connected to: A connector 31% · not connected 38% |
|
| VSSpin 16, 32, 33 | Connected to: GND 91% | — |
| PA8pin 18 | Connected to: Signal 62% · not connected 38% |
|
| PA15pin 25 | Connected to: Not connected 77% · a signal 23% | — |
| PB6pin 29 | Connected to: A connector 31%, AT24CS32-STUM 23%, TCA9555RTWR 23% · not connected 15% |
|
| PB7pin 30 | Connected to: A connector 31%, AT24CS32-STUM 23%, TCA9555RTWR 23% · not connected 23% |
|
| PH3pin 31 | Connected to: A connector 23% |
|
17 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sharp ce140f emul by ffxx68, Panelized pompe sap by ENACRobotique, Custom eval stm32L43KCU6 by hedfd434 and AnalogWatch by sulkith.
The STM32L432KCUx in open source designs
The gallery holds 17 open source boards using the STM32L432KCUx from 14 GitHub repositories; a typical one measures about 54.2 × 47.6 mm and carries around 49 components.
69% are two-layer designs, the rest use four layers or more, and 18% carry an open source license.
The most starred is Sharp ce140f emul by ffxx68.
Parts used alongside the STM32L432KCUx
Microcontrollers on boards using the STM32L432KCUx
What boards using the STM32L432KCUx are built for
STM32L432KCUx: common questions
Where can I find a STM32L432KCUx reference design?
Each of the 17 boards on this page is a real design using the STM32L432KCUx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the STM32L432KCUx VDD pin?
The VDD pins have a decoupling capacitor on 11 of 13 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 13 open source designs using the STM32L432KCUx.
What decoupling capacitors do designs use on the STM32L432KCUx VDDA pin?
The VDDA pin has a decoupling capacitor on 11 of 13 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 13 open source designs using the STM32L432KCUx.
What resistor goes on the STM32L432KCUx PH3 pin?
The PH3 pin has a resistor to GND on 11 of 13 designs, most often 10 kΩ (then 100 kΩ). Counted from the KiCad layouts of 13 open source designs using the STM32L432KCUx.
What parts are used alongside the STM32L432KCUx?
The PESD2CAN, SN65HVD230, AT24CS32-STUM, LM2594M-5.0 and MCP1825S appear in the most repositories here.
Which microcontrollers do boards using the STM32L432KCUx use?
Most are built on STM32 (17).
How big is a typical board using the STM32L432KCUx?
The median is 54.2 × 47.6 mm, and 69% are two-layer designs.
What is the most popular open source board using the STM32L432KCUx?
By GitHub stars, Sharp ce140f emul by ffxx68, with 21 stars.
Can I simulate one of these boards using the STM32L432KCUx before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.