PMOD2PSRAM
About the PMOD2PSRAM PCB
PMOD2PSRAM is an open source PCB design by kelu124, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 18.8 × 16.3 mm, with 4 components from 4 distinct parts.
Other key parts include the APS6404L-3SQR-SN. By type, the board carries 1 IC, 1 connector, 1 capacitor and 1 resistor.
From the project
Modules for signal acquisition and transmission - using the PMOD standard
This work is based on previous TAPR projects, the echOmods project, the un0rick project, and the lit3rick project - their boards are open hardware and software, developped with open-source elements as much as possible.
The hardware is licensed under TAPR Open Hardware License () The software components are free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. * The documentation is licensed under a Creative Commons…
Main components on the PMOD2PSRAM
PMOD2PSRAM bill of materials (BOM)
4 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | APS6404L-3SQR-SN | SOIC127P600X175-8N | IC1 |
| 1 | AMPHENOL_132357-11 Conn_02x06_Odd_Even | PinHeader_2x06_P2.54mm_Horizontal | J1 |
| 1 | 100nF | C_1206_3216Metric | C1 |
| 1 | 10R 10K | R_1206_3216Metric | R1 |
PMOD2PSRAM design files
The KiCad project lives in the kelu124/PMOD_rp2040 repository on GitHub; these links point at the commit this page was built from.
PMOD2PSRAM: common questions
How big is the PMOD2PSRAM PCB?
The PMOD2PSRAM measures 18.8 × 16.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PMOD2PSRAM?
4 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PMOD2PSRAM design files?
From the kelu124/PMOD_rp2040 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PMOD2PSRAM design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which kelu124 chose for the repository.
