45 open source boards using the APS6404L-3SQR-SN

Real designs built with the APS6404L-3SQR-SN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

45 boardsClear filters|Most starred

How designs wire the APS6404L-3SQR-SN

Read from the KiCad layouts of 24 open source designs, one per repository: what each pin of the APS6404L-3SQR-SN connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 21 of 24 designs, most often 100 nF (then 1 µF).
  • The CE pin has a pull-up to 3.3V on 18 of 24 designs, most often 10 kΩ (then 4.7 kΩ).
CEpin 1Connected to: The microcontroller 58%, a connector 21%
  • Pull-up to 3.3V on 75% · 10 kΩ (15), 4.7 kΩ (2), 2.2 kΩ (1)
VSSpin 4Connected to: GND 100%
VCCpin 8Connected to: 3.3V 100%
  • Decoupling capacitor on 88% · 100 nF (26), 1 µF (5), 4.7 µF (1)

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PicoGUS by polpo, PMOD2PSRAM by kelu124, AgonLight2 Rev A by OLIMEX and RP2040 DSP Modular by DMME-NL.

The APS6404L-3SQR-SN in open source designs

The gallery holds 45 open source boards using the APS6404L-3SQR-SN from 26 GitHub repositories; a typical one measures about 85 × 65 mm and carries around 93 components.

69% use four copper layers or more, and 78% carry an open source license.

The most starred is PicoGUS chipdown with edge rails by polpo.

Microcontrollers on boards using the APS6404L-3SQR-SN

APS6404L-3SQR-SN: common questions

Where can I find a APS6404L-3SQR-SN reference design?

Each of the 45 boards on this page is a real design using the APS6404L-3SQR-SN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the APS6404L-3SQR-SN VCC pin?

The VCC pin has a decoupling capacitor on 21 of 24 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 24 open source designs using the APS6404L-3SQR-SN.

What pull-up resistor is used on the APS6404L-3SQR-SN CE pin?

The CE pin has a pull-up to 3.3V on 18 of 24 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 24 open source designs using the APS6404L-3SQR-SN.

What parts are used alongside the APS6404L-3SQR-SN?

The USBLC6-2SC6, RP2350B, W25Q128JVSIQ, RP2040 and W25Q128JVS appear in the most repositories here.

Which microcontrollers do boards using the APS6404L-3SQR-SN use?

Most are built on RP2040/RP2350 (29), STM32 (6) and FPGA (2).

How big is a typical board using the APS6404L-3SQR-SN?

The median is 85 × 65 mm, and 31% are two-layer designs.

What is the most popular open source board using the APS6404L-3SQR-SN?

By GitHub stars, PicoGUS chipdown with edge rails by polpo, with 800 stars.

Can I simulate one of these boards using the APS6404L-3SQR-SN before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part