N20-microbit robot-AI
kenken64·n20-microbit-robot-AI·pcb_planning/N20_RevAV_MECHANICAL_ONLY.kicad_pcb
About the N20-microbit robot-AI PCB
N20-microbit robot-AI is an open source PCB design by kenken64, published on GitHub. It is a 2-layer board measuring 86 × 103 mm, with 0 components from 0 distinct parts.
It belongs with the robotics & motion designs in this gallery.
From the project
A two-wheel robot built around a micro:bit V2 in a vertical 80-way socket, two N20 gear motors, a 4 × AA pack, an ultrasonic sensor and a QTRX line sensor. This repository holds the KiCad schematic, a mechanical-only PCB skeleton, the 3D-printed chassis parts, and the validation
A two-wheel robot built around a micro:bit V2 in a vertical 80-way socket, two N20 gear motors, a 4 × AA pack, an ultrasonic sensor and a QTRX line sensor. This repository holds the KiCad schematic, a mechanical-only PCB skeleton, the 3D-printed chassis parts, and the validation evidence collected so far.
An interactive model of the robot with an explode slider, an eight-step assembly sequence, a parts list and a fit check that highlights where parts collide. It shows the Rev AQ printed parts from archive/mechanicalrevAQ/stl/`. Rev AW was designed to fix the clashes its fit check lists, and…
N20-microbit robot-AI design files
The KiCad project lives in the kenken64/n20-microbit-robot-AI repository on GitHub; these links point at the commit this page was built from.
N20-microbit robot-AI: common questions
How big is the N20-microbit robot-AI PCB?
The N20-microbit robot-AI measures 86 × 103 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the N20-microbit robot-AI?
0 components, from 0 distinct parts. The full bill of materials is listed on this page.
Where can I download the N20-microbit robot-AI design files?
From the kenken64/n20-microbit-robot-AI repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the N20-microbit robot-AI design in my own project?
The repository has no license, so all rights stay with kenken64. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979