ORTD2662-PROTOBOARD
About the ORTD2662-PROTOBOARD PCB
ORTD2662-PROTOBOARD is an open source PCB design by KerJoe, published on GitHub. It is a 2-layer board measuring 100 × 70 mm, with 254 components from 90 distinct parts.
Other key parts include the RTD2662, TPS61040DBV, TL1838, CH341T and PT4103. By type, the board carries 88 resistors, 78 capacitors, 24 diodes, 18 inductors, 15 connectors and 12 ICs.
It belongs with the displays & leds designs in this gallery.
From the project
Prototype board for RTD2662 display controller
Prototype board for developing RTD2662 firmware.
Main components on the ORTD2662-PROTOBOARD
ORTD2662-PROTOBOARD bill of materials (BOM)
254 components, 90 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RTD2662 | HLQFP-128-1EP_14x20mm_P0.5mm_EP7.11x8.26mm | U1 |
| 2 | TPS61040DBV | SOT-23-5 | U2, U8 |
| 1 | TL1838 | Vishay_MINICAST-3Pin | U3 |
| 1 | CH341T | SSOP-20_5.3x7.2mm_P0.65mm_SmallPads | U4 |
| 1 | PT4103 | SOT-23-6 | U5 |
| 1 | ES7134S | SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | PAM8003 | HSOP-16-1EP_3.9x9.9mm_P1.27mm_EP2.41x4.1mm | U7 |
| 1 | 24x04 | SOT-23-5 | U9 |
| 1 | 25x40 | SOIC-8_3.9x4.9mm_P1.27mm_DIP-8_W7.62mm_Socket | U10 |
| 1 | APW7313 | HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.1mm | U11 |
| 1 | AMS1117-1.8 | SOT-223-3_TabPin2 | U12 |
| 3 | BC846 | SOT-23 | Q1, Q2, Q4 |
| 2 | AO3401A | SOT-23 | Q3, Q5 |
| 1 | 27MHz | Crystal_SMD_HC49-SD+HC49-U | Y1 |
| 1 | 12MHz | Crystal_SMD_HC49-SD+HC49-U | Y2 |
| 1 | DVI | DVI | J1 |
| 1 | HDMI A | HDMI_A | J2 |
| 2 | 3.5mm jack | Jack_3.5mm_PJ320D_Horizontal | J3, J13 |
| 1 | VGA | DSUB-15-HD_Female_Horizontal_P2.29x2.54mm | J4 |
| 1 | RCA Jack | RCJ-013 | J5 |
Show 70 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CVBS | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | Mini-DIN-4 | Mini-DIN_Female_6Pin_2rows | J7 |
| 1 | USB B | USB_B_OST_USB-B1HSxx_Horizontal | J8 |
| 1 | Keyboard Connector | JST_PH_B10B-PH-K_1x10_P2.00mm_Vertical | J9 |
| 1 | UART/I2C | PinHeader_1x03_P2.54mm_Vertical | J10 |
| 1 | LCD Connector | PinHeader_2x25_P1.27mm_Vertical_SMD_SmallPads | J11 |
| 1 | SPDIFF | PinHeader_1x02_P2.54mm_Vertical | J12 |
| 1 | DC Jack | BarrelJack_Horizontal | J14 |
| 1 | Expansion Connector | PinHeader_2x06_P2.54mm_Vertical | J15 |
| 2 | Ring3/Sleeve GND Select | SolderJumper-3_P1.3mm_Bridged2Bar12_RoundedPad1.0x1.5mm | JP1, JP2 |
| 1 | LCD Power Source Select | SolderJumper-3_P1.3mm_Bridged2Bar12_RoundedPad1.0x1.5mm | JP3 |
| 1 | LCD Power Voltage Select | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP4 |
| 1 | Power In Select | PinSocket_1x03_P2.54mm_Vertical | JP6 |
| 1 | Reset Pad | SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP7 |
| 1 | 1kΩ | PVZ3A | RV1 |
| 1 | POWER | SW_SPST_CK_RS282G05A3 | SW1 |
| 1 | MENU | SW_SPST_CK_RS282G05A3 | SW2 |
| 1 | UP | SW_SPST_CK_RS282G05A3 | SW3 |
| 1 | DOWN | SW_SPST_CK_RS282G05A3 | SW4 |
| 1 | SOURCE | SW_SPST_CK_RS282G05A3 | SW5 |
| 14 | TVS | L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8 +6 |
| 3 | MBR0530 | D_SOD-123 | D15, D18, D21 |
| 2 | BAV99 | SOT-23 | D16, D19 |
| 1 | 6.8V | D_SOD-323_HandSoldering | D17 |
| 1 | 16V | D_SOD-323_HandSoldering | D20 |
| 1 | R/G Dual LED | LED_Dual_0805_2012Metric | D22 |
| 1 | BAT54 | D_SOD-323_HandSoldering | D23 |
| 1 | 4.7V | D_SOD-323_HandSoldering | D24 |
| 10 | 120Ω | L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | FB1, FB2, FB3, FB4, FB5, FB6, FB7, FB8 +2 |
| 4 | 1uH | L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L1, L2, L3, L4 |
| 2 | 6.8uH | L_Bourns-SRN4018 | L5, L7 |
| 1 | 22uH | L_Bourns-SRN4018 | L6 |
| 1 | 6.8uH | L_Bourns_SRN6045TA | L8 |
| 8 | 22nF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2, C7, C8, C9, C10, C15, C16 |
| 4 | 270pF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3, C5, C11, C13 |
| 4 | 820pF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C4, C6, C12, C14 |
| 13 | 47nF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C17, C18, C19, C22, C23, C24, C25, C28 +5 |
| 6 | 5.1pF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C20, C21, C26, C27, C32, C33 |
| 4 | 100nF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C36, C42, C69, C77 |
| 24 | 1uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C37, C38, C43, C44, C50, C52, C54, C55 +16 |
| 4 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C39, C45, C51, C66 |
| 2 | 20pF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C40, C41 |
| 2 | 2.2uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C46, C47 |
| 2 | 15pF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C48, C49 |
| 1 | 10nF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C53 |
| 2 | 22uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C67, C68 |
| 1 | 3.9nF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C76 |
| 1 | 100uF | CP_EIA-3528-21_Kemet-B | C78 |
| 10 | 4.7kΩ | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R2, R4, R5, R34, R35, R47, R48 +2 |
| 7 | 1kΩ | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3, R6, R20, R21, R53, R55, R69 |
| 10 | 75Ω | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R9, R10, R13, R14, R24, R25, R30, R31 +2 |
| 25 | 100Ω | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R15, R16, R17, R18, R19, R22, R23, R26 +17 |
| 1 | 82kΩ | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R49 |
| 10 | 11kΩ | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R50, R51, R57, R66, R67, R70, R84, R85 +2 |
| 2 | 1MΩ | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R52, R59 |
| 1 | 270Ω | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R56 |
| 1 | 0.68Ω | R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R58 |
| 2 | 680Ω | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R60, R71 |
| 2 | 470Ω | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R61, R63 |
| 2 | 1.5kΩ | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R62, R64 |
| 1 | 3.9kΩ | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R65 |
| 4 | 330Ω | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R68, R74, R77, R80 |
| 1 | 2kΩ | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R72 |
| 1 | 3.6kΩ | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R73 |
| 2 | 100kΩ | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R81, R82 |
| 1 | 6.8kΩ | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R83 |
| 1 | 39kΩ | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R86 |
| 1 | 2.2kΩ | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R87 |
| 1 | 27kΩ | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R88 |
| 2 | 100Ω | R_Array_Convex_4x0603 | RN1, RN2 |
ORTD2662-PROTOBOARD design files
The KiCad project lives in the KerJoe/RTD2662Board repository on GitHub; these links point at the commit this page was built from.
- LayoutRTD2662Board.kicad_pcb
- SchematicRTD2662Board.kicad_sch
ORTD2662-PROTOBOARD: common questions
How big is the ORTD2662-PROTOBOARD PCB?
The ORTD2662-PROTOBOARD measures 100 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ORTD2662-PROTOBOARD?
254 components, from 90 distinct parts. The full bill of materials is listed on this page.
Where can I download the ORTD2662-PROTOBOARD design files?
From the KerJoe/RTD2662Board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ORTD2662-PROTOBOARD design in my own project?
The repository has no license, so all rights stay with KerJoe. Use it as a reference, and ask the author before reusing the design.
More boards in RTD2662Board
Similar boards
LevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k