Fallout pcb badge
Keyaan-07·fallout-pcb-badge·hardware/fallout-pcb-badges.kicad_pcb
About the Fallout pcb badge
Fallout pcb badge is an open source STM32 PCB design by Keyaan-07, published on GitHub. It is a 2-layer board measuring 55 × 40 mm, with 85 components from 9 distinct parts.
Its main chip is the STM32F030C8TX, from the STM32 family. Other key parts include the IS31FL3731-SA and MCP1700X-330XXTT. By type, the board carries 72 diodes, 4 capacitors, 4 resistors, 3 ICs, 1 connector and 1 switch.
It belongs with the wearables and displays & leds designs in this gallery.
From the project
a shitty badge for the fallout irl hackathon
Okay so i made the fallout badge(and everyone else who is a participant made it) andddd i added some unique that that i guess no one might have it. It is decent, it uses an stm32f030. So the idea i got for the LED matrix was like when i was talking to zach. He was like what are you doing unique in your PCB Badge, so i just formed the idea instantly in my mind and i stuck with it. Also, while writing this, i got the idea to like add an e-ink, so i am probably gonna add it later, i am really tired rn. I will be buying parts myself. yayay. The bom is js the one that the JLC fab toolkit makes…

Main components on the Fallout pcb badge
Fallout pcb badge bill of materials (BOM)
85 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F030C8TX STM32F030C8Tx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | IS31FL3731-SA | SSOP-28_5.3x10.2mm_P0.65mm | U2 |
| 1 | MCP1700X-330XXTT MCP1700x-330xxTT | SOT-23 | U3 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J1 |
| 1 | SW_Push | SW_SPST_PTS810 | SW1 |
| 72 | LED_Small | LED_0402_1005Metric | D1, D2, D3, D4, D5, D6, D7, D8 +64 |
| 4 | 100N 100n | C_0402_1005Metric | C1, C2, C3, C4 |
| 1 | 20K 20k | R_0402_1005Metric | R1 |
| 3 | 4.7K 4.7k | R_0402_1005Metric | R2, R3, R4 |
Fallout pcb badge design files
The KiCad project lives in the Keyaan-07/fallout-pcb-badge repository on GitHub; these links point at the commit this page was built from.
Fallout pcb badge: common questions
What microcontroller does the Fallout pcb badge use?
The Fallout pcb badge is built around the STM32F030C8TX, from the STM32 family.
How big is the Fallout pcb badge?
The Fallout pcb badge measures 55 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Fallout pcb badge?
85 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Fallout pcb badge design files?
From the Keyaan-07/fallout-pcb-badge repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Fallout pcb badge design in my own project?
The repository has no license, so all rights stay with Keyaan-07. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Fallout pcb badge without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k